Build it the way you want it! This all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000 lb. winch. Its also equipped with D-Ring mounts that are welded on the inside and out that provides a tow able anchor when pulling your rig behind a truck or motor home. Center Section features brushed end plates for a clean and stylish look. Choose between our Mid or Full Width End Plate knowing that bumper clearance won't be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.
These new Radiators from Drake Off Road&tm; are fully welded Aluminum Construction with no gaskets or epoxy to crack, chip or leak. A Two Core Radiator maintains improved cooling system temperatures. Featuring an all aluminum billet machined neck this radiator is a direct bolt in replacement with thick heavy duty mounting flanges. Also features include dye stamped end tanks with trussed design for rigidity. Works with factory fan shroud on 6 Cylinder TJ only.
Olympic 4x4 took their famous Rock Bumpers and engineered them for the new JK Wranglers! These stout and durable bumpers add the protection you need and the functionality you're after. Easy bolt on installation will have you looking good in no time flat. Choose from either the popular Gloss Black or new Rubicon Black.
The Olympic 4x4 Smuggler Bumper with swing out tire carrier swings out and is an economical choice to the dual pivot tire carrier swing. This bumper features built-in Hi-Lift Jack points & D-Ring Mounts. They also feature a built-In rear winch mount plate. Even More: a 2" receiver is built-in! Features included but not shown are a built in CB antenna mount and HiLift Jack mount on Tire Swing Section which is angled so the jack will clear most parking garages and your own garage! Made in the USA.
Defender Rear Bumper Engineered to easily bolt on. Bolts on without interfering with O.E.M. style 2" Receiver Hitch. Designed to protect your Jeep from extreme descending degree of angle dissents. Manufactured from 2" round construction quality heavy wall steel tube, providing a 1/4" of steel between your Jeep and any obstacle you come up against. Defender style design protects the rear corner rocker panels from on and off road hazards.
Custom made specifically for the Jeep Wrangler by Quadratec. Supports winches with the common 10" x 4.5" bottom bolt pattern. The 1/4" thick one piece carbon steel design is e-coated and finished in satin black powder coat for lasting durability.
Our Premium Class II receiver hitch for JK is Essential for having fun and getting things done. Simple bolt-on installation takes minutes to install with no vehicle modifications. We dare you to compare our Exclusive hitch to others with its premium design and construction without a premium price. Our NEW QuadraPac bundle includes our Premium Class II Receive Hitch, plug and play Hitch wiring kit and a Jeep® Logo Rubberized Hitch plug.
M.O.R.E. has a new product for enhancing your comfort level while driving your Jeep. This new easy bolt-in Dead Pedal helps with leg fatigue that many of us get while driving when you do not have a place to support your foot. This design allows you to place the dead pedal in the best position, requires minor drilling with a small cut in the carpet, and comes powder coated black. Fits automatic or manual transmissions for TJ, automatic transmissions only for JK. Passenger side also available.
Versa-Pods accept 4" full-range speakers of your choice*, or you can purchase them loaded with Power Acoustik¨ 4" full-range coaxial speakers rated at 50 watts rms and 87 dB efficiency. Every pair of Versa-Pods includes self-tapping screws, wire grommets, poly-fill, and installation instructions. These pods are small enough to fit just about anywhere. The unique shape of the pods and their flat bottom allow fitment in a lot of little nooks all over a vehicle's interior and can really enhance your vehicle's audio spectrum. Versa-Pods are mirror images of each other, one 'left' and one 'right'; if you can't get one of the pods to fit where you want, try the other pod and it just may work!
Introducing the latest in pre-loaded, pre-programmed power from the most trusted name in engineered engine efficiency...Banks. The Banks AutoMind programmer comes "ready to run" with pre-loaded power, with towing, sport, or economy settings right out of the boxÉand right for the job at hand! Its calibrations were developed with power and increased MPG in mind. The AutoMind can also display a host of critical engine functions and provides "service technician" diagnostic capabilities with its ability to scan and clear vehicle trouble codes. Intense, usable, real horsepowerÉ only from Banks!
Manufactured exclusively for Quadratec by MAGNAFLOW Exhaust these kits are built to last. These kits feature all stainless steel, mandrel-bent tubing construction with a polished stainless steel tip. The mufflers feature a freeflowing, straight-through perforated stainless steel core, stainless mesh wrap and acoustical fiber fill to deliver that smooth, deep tone. These exclusive kits are backed by a Limited Lifetime Warranty.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either.
