|
 |  | 
 | | | | 
| | | | 
| K&N’s lifetime replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. Simply remove the disposable air filter and replace it with a K&N; there is NEVER any cutting or fitting required. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.
To maintain airflow efficiency, use Recharger Filter Care Service Kit. | | | 
| Bolt On Horsepower!
The PowerAid Throttle Body Spacers from AIRAID Premium Filter Company are designed to greatly improve the low-end torque and horsepower characteristics of your engine. PowerAid accomplishes this by spacing the throttle body one inch and adding a dyno-proven Helix style bore(s). As the intake air passes through the spacer, the Helix bore creates a vortex action that improves atomization creating a more complete combustion and an efficiently burning engine. The results are improved drivability and increased fuel efficiency. The PowerAid spacer is 50 state legal, will not void your new car warranty, and can be used with any grade fuel.
Proudly Made in the USA. | | | 
| Bolt On Horsepower!
The PowerAid Throttle Body Spacers from AIRAID Premium Filter Company are designed to greatly improve the low-end torque and horsepower characteristics of your engine. PowerAid accomplishes this by spacing the throttle body one inch and adding a dyno-proven Helix style bore(s). As the intake air passes through the spacer, the Helix bore creates a vortex action that improves atomization creating a more complete combustion and an efficiently burning engine. The results are improved drivability and increased fuel efficiency. The PowerAid spacer is 50 state legal, will not void your new car warranty, and can be used with any grade fuel.
Proudly Made in the USA. | | | 
| This is the premium cleaner kit for your Airaid Air Intake System. It is essential for a high-flow filter to remain clean and free of debris to keep maximum air flow into your engine. Tune-Up kit is simple to use, just 3 easy steps:
(1) spray cleaner on filter and let soak for about 10 minutes,
(2) Allow the filter to dry, then finally
(3) apply performance oil into each pleat.
Complete instructions included. | | | 
| AIRAID's proud to release the Cool Air Dam Intake System for the 1997-2006 Jeep Wrangler TJ with the 4.0L engine. This system features a full length intake tube that draws through a totally redesigned Cool Air Dam. This combination yields an additional 14 lbs/ft of torque (at low rpm) and an additional 11 Horsepower, a plus for all off-road enthusiasts. AIRAID’s CAD Series Intakes are designed to isolate the heat of the engine away from the air inlet, taking advantage of the dense cool air from outside the engine compartment. At the heart of the system is AIRAID’s Premium SynthaFlow™ series High- Flow Filter that increases air flow significantly over the stock air filter assembly.
Proudly Made in the USA. | | | 
| NEVER OIL YOUR AIR FILTER AGAIN
AEM’s DRYFLOW Synthetic filter eliminates any warranty concerns on new vehicles because there is no chance of oil traveling up the inlet path and damaging the Mass Airflow (MAF) sensor. It’s also much easier to clean and since you don’t have to oil after cleaning (or wait for the oil to wick), service time is cut by approximately 90%! Just soap it, rinse it, shake it dry and go! | | | 
| These kits are not pre-oiled. | | | 
| K&N Recharger® kits contain K&N air filter cleaner and air filter oil for recharging any K&N Filtercharger® Air Filter. Restores air flow efficiency so your Filtercharger performs like new!
| | | 
| Dyno tested to deliver more torque and more horsepower. How does a 13-horsepower gain @ 5,000 RPM for your 4.0L engine sound? Torque gains of over 15 ft./lbs. were also achieved at 4,500 RPM. AEM performs three-axis testing to qualify gains made at different throttle positions and to ensure extra power at every point across the rpm band. AEM air induction systems are individually tuned in length and diameter with the highest standards of construction. Kits include an exclusive throttle body spacer for maximum performance and a powder coated CNC mandrel-bent 6061 aluminum air tube with TIG-welded fittings and brackets. AEM now includes DRYFLOW Synthetic filters with their Brute Force Induction Systems. Made from a polyester synthetic media that never degrades over time, meaning it delivers the same filtration efficiency after its 50th cleaning cycle as it does right out of the box. The powder-coated steel heat shield blocks warm engine bay air, allowing the colder (horsepower producing) air though the intake. Made in U.S.A. 50-State Legal. | | | 
| New for the 2007+ Wrangler is Airaid's new cold air intake for the 3.8L engine. This system features a full length intake tube that draws through a totally redesigned Cool Air Dam. This combination yields an additional 24 lbs/ft of torque (at low rpm) and an additional 14 Horsepower, a plus for all off-road enthusiasts. Intakes are designed to isolate the heat of the engine away from the air inlet, taking advantage of the dense cool air from outside the engine compartment.
Proudly Made in the USA.
Don't forget the Airaid Filter Tune-up Kit is essential for keeping the AIRAID® Cold Air Dam Intake clean and free of debris to keep maximum air flow into your engine. | | | 
| Banks' revolutionary Ram-Air Intake System offers the reliability and durability of a factory intake yet delivers astonishing airflow. It flows 62% better than stock and outflows Volant and AIRAID, thanks in part to the Ram-Air's huge filter area (fewer filter cleanings!), giant outlet, and the complete air filter housing with large side & bottom inlets. Banks Ram-Air collects & directs more power-producing cool, dense air to the engine, lowering EGTs and smoke and improving fuel economy, too! The lifetime 8-ply filter traps the most dirt and debris. And Ram-Air is the only aftermarket intake with 4-1/2" bellows to accommodate engine movement. This prevents component damage and promotes reliable service life. | | | 
| Bolt On Horsepower!
The PowerAid Throttle Body Spacers from AIRAID Premium Filter Company are designed to greatly improve the low-end torque and horsepower characteristics of your engine. PowerAid accomplishes this by spacing the throttle body one inch and adding a dyno-proven Helix style bore(s). As the intake air passes through the spacer, the Helix bore creates a vortex action that improves atomization creating a more complete combustion and an efficiently burning engine. The results are improved drivability and increased fuel efficiency. The PowerAid spacer is 50 state legal, will not void your new car warranty, and can be used with any grade fuel. | | | 
| K&N filters are the best you can get. Improve airflow to your engine and you will experience an increase in power and performance. Unlike normal paper element filters, the K&N filter is reusable and “rechargeable.” When you would normally throw away an old filter, you simply wash and re-oil this filter, and it is as good as new. K&N Air filters come with a million-mile warranty! How can you beat that?
The filter recharger kit is sold separately. | | |
|
Create Your Wish List Now
Fabtech - Special Offer!
Easter Jeep Safari in Moab
Visit SuperTruck Essentials
|
Privacy Policy | Terms of Business | Shipping Policy | Contact Us | Site Map | About Us
©1995-2008, Quadratec Inc. All rights reserved.
 | |
©1995-2008, Quadratec, Inc. All rights reserved. This entire site with its content and parts is copyright protected. All images are invisibly watermarked and cannot be used without explicit agreement from Quadratec Inc.
High Quality Performance Jeep Parts & AccessoriesTake your Jeep to the next level with the Jeep parts & accessories and enhancement products found on our site. We are a leading Jeep enthusiast dealer, providing exceptional performance Jeep parts & accessories to our customers. To improve Jeep suspension or find a unique Jeep part or accessory, simply search our site or contact one of our experienced customer service & parts & accessory representatives. It's a Jeep thing-and we do understand!
Jeep Replacement Parts & AccessoriesWe work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Corporation. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Corporation. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadratech Jeep Parts, but has no affiliation with Quadratech, Inc. For all of the essential parts to build up your Jeep vehicle, Quadratec is the place to shop.
|
5
|
