|
 |  | 
 | These time tested carburetors can deliver more horsepower, fuel economy and dependibility than stock units. Experience noticeable gains in torque and better acceleration. Includes an assembled carburetor body, manifold adapter, all linkage, a washable air filter with chrome housing and complete installation and tuning instructions. Most kits will deliver up to 18% increase in hp over factory carburetors while increasing fuel economy by 10-20%. The 32/36 and 38/38 designations refer to the diameter of the throttle bores in millimeters with a CFM of 300. Not legal for highway use in California. | | | 
| | | | 
| These time tested carburetors can deliver more horsepower, fuel economy and dependibility than stock units. Experience noticeable gains in torque and better acceleration. Includes an assembled carburetor body, manifold adapter, all linkage, a washable air filter with chrome housing and complete installation and tuning instructions. Most kits will deliver up to 18% increase in hp over factory carburetors while increasing fuel economy by 10-20%. The 34 designation refers to the diameter of the throttle bores in millimeters with a CFM of 300.
The 34 provides excellent driveability, tuneability and performance. It also has a tuneable power circuit valve, making installation easy as ther is no linkage to adjust (except on automatics). | | | 
| EMPI Performance Carburetors,
The 32/36 EPC conversion kits will deliver up to 18% more horsepower over the stock factory carburetor as well as up to a 10-20% increase in fuel economy. These 300 CFM units replace the stock Carter 2 barrel carburetors. You’ll experience noticeable gains in torque and better acceleration and these kits work well for any application regardless of modifications. With a slight sacrifice in fuel economy, the larger 38/38 EPC carburetors provide brisk acceleration & more bottom-end torque with up to 20% more horsepower over the stock factory carburetor while maintaining the same top-end performance as the 32/36 EPC carburetors. These 390 CFM units replaces stock Carter or Rochester 2 barrel carburetors. These kits work well for application regardless of modifications. Enhance the performance of your engine with added reliability and fuel efficiency. These kits are easy to install and will provide years of dependability. The EMPI 32/36 series carburetors are progressive in design and feature a primary and secondary linkage setup to provide a linear throttle response and increased fuel economy. The EMPI 38/38 kits feature synchronous type carburetors in which both barrels open simultaneously for an aggressive throttle response and maximum performance. Installation instructions cover old carburetor removal along with installation and adjustments to your new EMPI carburetor. (Not legal for highway use in the state of California.)
| | | 
| These 2-Barrel carburetor kits can deliver more horsepower, fuel economy & dependability than stock units. The 32/36 DGEV conversions can deliver up to 18% hp increases over factory carburetors as well as up to 10-20% in fuel economy (depending on driving style). With a slight sacrifice in fuel economy, the larger 38 DGES carburetor provides more brisk acceleration & more bottom-end torque while maintaining the same top-end performance as the 32/36 DGEV carburetors. Experience significant gains in torque & driveability and better acceleration without “flat spots.” These retrofit carburetor conversion kits are designed to replace the sometimes problematic Carter or Rochester carburetors without replacing intake manifolds. These kits are supplied with everything needed including manifold adapters, all linkage, a washable air filter with chrome housing* and simple, complete instructions for installation and tuning. Check local regulations concerning emissions & aftermarket carburetors. Not legal in California. | | | 
| Rebuild Kit for K550, K551, K552, K553 carbs
Also fits K600, K601
| | | | | | | | 
| | | | 
| EMPI Performance Carburetors,
The 32/36 EPC conversion kits will deliver up to 18% more horsepower over the stock factory carburetor as well as up to a 10-20% increase in fuel economy. These 300 CFM units replace the stock Carter 2 barrel carburetors. You’ll experience noticeable gains in torque and better acceleration and these kits work well for any application regardless of modifications. With a slight sacrifice in fuel economy, the larger 38/38 EPC carburetors provide brisk acceleration & more bottom-end torque with up to 20% more horsepower over the stock factory carburetor while maintaining the same top-end performance as the 32/36 EPC carburetors. These 390 CFM units replaces stock Carter or Rochester 2 barrel carburetors. These kits work well for application regardless of modifications. Enhance the performance of your engine with added reliability and fuel efficiency. These kits are easy to install and will provide years of dependability. The EMPI 32/36 series carburetors are progressive in design and feature a primary and secondary linkage setup to provide a linear throttle response and increased fuel economy. The EMPI 38/38 kits feature synchronous type carburetors in which both barrels open simultaneously for an aggressive throttle response and maximum performance. Installation instructions cover old carburetor removal along with installation and adjustments to your new EMPI carburetor. (Not legal for highway use in the state of California.)
| | |
| These time tested carburetors can deliver more horsepower, fuel economy and dependibility than stock units. Experience noticeable gains in torque and better acceleration. Includes an assembled carburetor body, manifold adapter, all linkage, a washable air filter with chrome housing and complete installation and tuning instructions. Most kits will deliver up to 18% increase in hp over factory carburetors while increasing fuel economy by 10-20%. The 32/36 and 38/38 designations refer to the diameter of the throttle bores in millimeters with a CFM of 300.
Not legal for highway use in California.
Linkage Kit required for automatic transmission equipped vehicles, part #51312.904
| | |
| Do you feel a need for more torque and horsepower? If this is your ultimate goal then the all new WK551-38 is the Weber Conversion kit for you. This conversion kit works well for any 6cyl application regardless of modifications. This conversion kit will give you a gain in horsepower as much as 20%. Does your vehicle have performance upgrades already? Are you planning future upgrades? No problem. With the Performance Jet pack included FREE in every 51312.54 kit (WK551-38 kit) you will have the ability to custom tailor your Weber Carburetor to your specific vehicle.
This is a great example of the Weber Carburetors reputation for adaptability and infinite tuning capabilities.
Not legal in CA, check local regulations concerning aftermarket carbs and emissions. | | | 
| Rebuild Kit for K551-38, K490 carbs | | | 
| EMPI Performance Carburetors,
The 32/36 EPC conversion kits will deliver up to 18% more horsepower over the stock factory carburetor as well as up to a 10-20% increase in fuel economy. These 300 CFM units replace the stock Carter 2 barrel carburetors. You’ll experience noticeable gains in torque and better acceleration and these kits work well for any application regardless of modifications. With a slight sacrifice in fuel economy, the larger 38/38 EPC carburetors provide brisk acceleration & more bottom-end torque with up to 20% more horsepower over the stock factory carburetor while maintaining the same top-end performance as the 32/36 EPC carburetors. These 390 CFM units replaces stock Carter or Rochester 2 barrel carburetors. These kits work well for application regardless of modifications. Enhance the performance of your engine with added reliability and fuel efficiency. These kits are easy to install and will provide years of dependability. The EMPI 32/36 series carburetors are progressive in design and feature a primary and secondary linkage setup to provide a linear throttle response and increased fuel economy. The EMPI 38/38 kits feature synchronous type carburetors in which both barrels open simultaneously for an aggressive throttle response and maximum performance. Installation instructions cover old carburetor removal along with installation and adjustments to your new EMPI carburetor. (Not legal for highway use in the state of California.)
| | | 
| EMPI Performance Carburetors,
The 32/36 EPC conversion kits will deliver up to 18% more horsepower over the stock factory carburetor as well as up to a 10-20% increase in fuel economy. These 300 CFM units replace the stock Carter 2 barrel carburetors. You’ll experience noticeable gains in torque and better acceleration and these kits work well for any application regardless of modifications. With a slight sacrifice in fuel economy, the larger 38/38 EPC carburetors provide brisk acceleration & more bottom-end torque with up to 20% more horsepower over the stock factory carburetor while maintaining the same top-end performance as the 32/36 EPC carburetors. These 390 CFM units replaces stock Carter or Rochester 2 barrel carburetors. These kits work well for application regardless of modifications. Enhance the performance of your engine with added reliability and fuel efficiency. These kits are easy to install and will provide years of dependability. The EMPI 32/36 series carburetors are progressive in design and feature a primary and secondary linkage setup to provide a linear throttle response and increased fuel economy. The EMPI 38/38 kits feature synchronous type carburetors in which both barrels open simultaneously for an aggressive throttle response and maximum performance. Installation instructions cover old carburetor removal along with installation and adjustments to your new EMPI carburetor. (Not legal for highway use in the state of California.)
| | |
| | | |
|
Superlift with Free EGR Flares
HighRock 4X4 Element Door
AEV Brute Kits
Visit SuperTruck Essentials
|
Privacy Policy | Terms of Business | Shipping Policy | Contact Us | Site Map | About Us
©1995-2008, Quadratec Inc. All rights reserved.
 | |
©1995-2008, Quadratec, Inc. All rights reserved. This entire site with its content and parts is copyright protected. All images are invisibly watermarked and cannot be used without explicit agreement from Quadratec Inc.
High Quality Performance Jeep Parts & AccessoriesTake your Jeep to the next level with the Jeep parts & accessories and enhancement products found on our site. We are a leading Jeep enthusiast dealer, providing exceptional performance Jeep parts & accessories to our customers. To improve Jeep suspension or find a unique Jeep part or accessory, simply search our site or contact one of our experienced customer service & parts & accessory representatives. It's a Jeep thing-and we do understand!
Jeep Replacement Parts & AccessoriesWe work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Corporation. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Corporation. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadratech Jeep Parts, but has no affiliation with Quadratech, Inc. For all of the essential parts to build up your Jeep vehicle, Quadratec is the place to shop.
|
5
|
