|
 |  | 
 | In response to the high failure rate of stock Jeep® headers, Gale Banks Engineering has designed a bulletproof exhaust header that's built to last a lifetime, and backs it with a lifetime warranty. It's common for a primary tube in original Jeep manifolds to separate at the collector. Banks eliminates the possibility of cracking or separating with superior construction & materials. While other aftermarket suppliers typically use 304 or mild steel with coatings that quickly burn off, Banks builds Torque Tube Headers with rugged, 409 stainless steel. Flanges are welded 360° on both sides, to stand up to heat, stress and abuse. By increasing exhaust flow, Torque Tubes optimize the torque curve of the popular 4.0L Wrangler engine. Power & efficiency improve, along with the exhaust note. Banks Headers bolt on with ease and are priced very competitively. | | | 
| In response to the high failure rate of stock Jeep® headers, Gale Banks Engineering has designed a bulletproof exhaust header that's built to last a lifetime, and backs it with a lifetime warranty. It's common for a primary tube in original Jeep manifolds to separate at the collector. Banks eliminates the possibility of cracking or separating with superior construction & materials. While other aftermarket suppliers typically use 304 or mild steel with coatings that quickly burn off, Banks builds Torque Tube Headers with rugged, 409 stainless steel. Flanges are welded 360° on both sides, to stand up to heat, stress and abuse. By increasing exhaust flow, Torque Tubes optimize the torque curve of the popular 4.0L Wrangler engine. Power & efficiency improve, along with the exhaust note. Banks Headers and optional head pipes* bolt on with ease and are priced very competitively.
*97-99 Jeep Wrangler TJ must reuse the original head pipe. | | | 
| | | | 
| | | | 
| This new Tri-Y design header will bolt directly to the factory exhaust system. "Using 1½" diameter 409 stainless steel primary tubes, a ½"-thick laser-cut port flange and ¼"-thick laser-cut collector flange, the new header improves performance for 4.0L 1991-1999 Jeep vehicles. "With the new TiTECH™ coating, headers will have heat stability to 1,600° F," Said Jack Mayberry, Edelbrock vice president of R&D. "At higher temperatures, the Ti-TECH™ coating will flux, becoming harder and more abrasion resistant, unlike organic coatings that chalk and lose adhesion with extreme heat."
Because Edelbrock listens to its customers, these new headers bolt directly to the factory crossover pipe with no cutting or welding required for installation. The tubing is mandrel-bent to help ensure superior flow. | | | 
| Improve exhaust flow and engine response or replace cracked and brittle originals with one of these extreme value exhaust headers. Fits ’91-99 Wrangler 4.0L engines without modifications. Available in three great finishes. Choose show polished 304 stainless steel or unpolished 409 stainless. A low priced high temp black coated steel version is also available for smaller budgets. | | | 
| BORLA Headers are tuned to suit your vehicle. They increase power and maximize fuel efficiency. Most header kits are designed for use on vehicles with manual transmissions. Vehicles with automatics may require modifications to make fit. When combined with a Cat Back system, vehicles experience 10-15 horsepower increases. Great sound with excellent flow. BORLA systems are street legal in 50 states. With the Million Mile Warranty, BORLA is the last exhaust system you'll ever need to buy. | | | 
| The Banks TorqueTubes assembly for the 2.5L Wrangler provides nearly identical engineering innovations and benefits as the TorqueTubes for the 4.0L 6-cylinder Jeeps: bulletproof construction … precision fit of the dead-flat half-inch flange to the port pattern … imperviousness of the flange to cracking and separating … and the easy, bolt-on design. Includes an extra-thick gasket (not shown) that stands up to super-hot temperatures. | | | 
| | | | 
| | | | 
| Improve exhaust flow and engine response or replace cracked and brittle originals with one of these extreme value exhaust headers. Fits '00-04 Wrangler 4.0L engines without modifications. Available in three great finishes. Choose show polished 304 stainless steel or unpolished 409 stainless. A low priced black coated steel version is also available for smaller budgets. Kits include header, flange gasket, hardware and front pipe flange gasket. | | | 
| | | | 
| | | | 
| | | | 
| | | |
|
Create Your Wish List Now
AEV Brute Kits
Dick Cepek Rebate
Visit SuperTruck Essentials
|
Privacy Policy | Terms of Business | Shipping Policy | Contact Us | Site Map | About Us
©1995-2008, Quadratec Inc. All rights reserved.
 | |
©1995-2008, Quadratec, Inc. All rights reserved. This entire site with its content and parts is copyright protected. All images are invisibly watermarked and cannot be used without explicit agreement from Quadratec Inc.
High Quality Performance Jeep Parts & AccessoriesTake your Jeep to the next level with the Jeep parts & accessories and enhancement products found on our site. We are a leading Jeep enthusiast dealer, providing exceptional performance Jeep parts & accessories to our customers. To improve Jeep suspension or find a unique Jeep part or accessory, simply search our site or contact one of our experienced customer service & parts & accessory representatives. It's a Jeep thing-and we do understand!
Jeep Replacement Parts & AccessoriesWe work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Corporation. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Corporation. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadratech Jeep Parts, but has no affiliation with Quadratech, Inc. For all of the essential parts to build up your Jeep vehicle, Quadratec is the place to shop.
|
5
|
