|
 |  | 
 | Don't risk walking home. Whether you're on the trail or on the highway, your oil pan is too vulnerable to take a chance. Protect It! The Rock-ItTM Oil Pan Skid Plate is made of Heavy Duty .125 tough steel plate. Designed for optimum strength and protection, this is a must for any Jeep«. Too many exposed, unprotected Jeep oil pans have fallen victim to road debris and other highway hazards. Rocks on trails are the expected hazards. Don't take the risk, protect your Oil Pan with the low cost, simple solution. No hardware is required to install, and no tools are necessary! Simply use 5 minute permanent adhesive. The open design allows accumulated dirt to be simply washed out from open the front through to the open rear. There is no chance of rusting out oil pan with clogged soggy dirt and trash. Features easy access to the oil drain plug.
| | | 
| The full enclosure design has a tight, 1/4" clearance between the skid plate and steering box to maintain excellent clearance over the big rocks. This also means full structural rigidity - so that when the rock hits there is minimal deflection. Also features large holes for debris clearance without sacrificing structural support. Made from 3/16" steel and powder-coated in black. designed to work with factory bumper. | | | 
| The sway bar on 97-06 Wranglers is located up on top of the chassis leaving the bottom of the radiator exposed. In addition, the factory radiator uses a plastic bottom tank that can be broken leaving you without coolant. This guard is made from 1/8" thick steel and attaches in two places. The body mount under the grill and the passenger side of the chassis. Minor drilling is required for the mount on the passenger side. All hardware is provided. Comes with a Power-coated black finish. | | | 
| These skid plates are completely bolt-on and protect the mounting tabs of the lower control arms on the Dana 30 or 44 front axle. Why does this matter? Simply because the mounting tabs are among the first parts to hit the rocks and they are pretty easily damaged. They're made of surprisingly thin material and we've seen and heard of them being literally torn off while wheeling. | | | 
| Keep your gas tank protected with our gas tank skid plates. | | | 
| Replace your plastic factory front valence with this tough AEV 1/8" thick stamped steel skid. Factory styling protects your crossmember steering and swaybar from offroad obstacles. Works with AEV Front Bumpers for JK. Will not interfere with oversized tires. Rust inhibiting E-coating is top coated with an attractive textured black powder paint finish. Skid plates come complete with installation hardware. Made in USA. | | | 
| Replace your factory plastic front bumper cover with this heavy duty 1/8th thick steel skid plate from Skid Row! This 100% bolt-on application means no drilling or welding and can be installed with just simple hand tools. Protect your front end from rocks and debris! Includes all required hardware for easy installation. | | | 
| Skid Plates provide added protection when traveling off road. Made from heavy-gauge steel and painted with a high quality black powdercoat finish. | | | 
| Put some thick, 3/16" steel between your gas tank and the rough terrain your Jeep will conquer. The WARN Fuel Tank Skid Plate for the Jeep Wrangler not only adds extreme protection over the stock setup, it bolts directly onto the frame using the existing factory attachment points. | | | 
| Built to exceed factory specifications by using 12-gauge HRPO steel, this 20-gallon, Gas Tank Skid Plate is jig-welded and black powder-coated for lasting durability. For the YJ Wrangler only, this part replaces discontinued Chrysler # 52006870. | | | 
| The Jeep TJ's coil suspension is wonderful, but it leaves the steering box very vulnerable to rocks. Our TJ steering box skid plate bolts on easily and only requires the drilling of one hole. Constructed of 3/16" thick steel, they fit well and provide serious protection for your vulnerable steering box. | | | 
| Protect your TJ's steering box from trail hazards with Fabtech's 1/4" thick steel skid plates. Heavy duty one piece welded design bolts directly to your frame in minutes. Available in black powder coat finish only.
| | | 
| Skid RowĘs Tellico Tough Engine Skid Plates require no vehicle modifications and are specifically designed to work with or without a suspension lift. This gives you the protection you need when you're starting out with a stock height vehicle that puts your oil pan closest to the rocks. These skid plates are made of 3/16ö thick steel and are powder-coated semi-gloss black for a durable & attractive finish. Skid Row has also included an Oil Drain Hole, so changing your oil is still a snap. Engine plates mount solidly to the Jeep's frame & are specially designed for easy bolt-up installation with no drilling. | | | 
| When Jeep released the all-new 2007 Wrangler (JK), Warn Industries made sure to offer the aftermarket performance parts needed to make this vehicle ready for the toughest off-road adventures. To accommodate JK enthusiasts, Warn Industries has launched a Blocker Beam Skid Plate for this vehicle. | | | 
| This new engine/transmission skid plate is the first and only one available for your awesome new JK. It is designed to provide complete coverage for your vulnerable engine oil pan, transmission, AND your exhaust system. It is designed to work on stock vehicles and with virtually any suspension lift: short or long arm. | | |
|
HighRock 4X4 Element Door
AEV Brute Kits
Poly Performance Parts
Visit SuperTruck Essentials
|
Privacy Policy | Terms of Business | Shipping Policy | Contact Us | Site Map | About Us
©1995-2008, Quadratec Inc. All rights reserved.
 | |
©1995-2008, Quadratec, Inc. All rights reserved. This entire site with its content and parts is copyright protected. All images are invisibly watermarked and cannot be used without explicit agreement from Quadratec Inc.
High Quality Performance Jeep Parts & AccessoriesTake your Jeep to the next level with the Jeep parts & accessories and enhancement products found on our site. We are a leading Jeep enthusiast dealer, providing exceptional performance Jeep parts & accessories to our customers. To improve Jeep suspension or find a unique Jeep part or accessory, simply search our site or contact one of our experienced customer service & parts & accessory representatives. It's a Jeep thing-and we do understand!
Jeep Replacement Parts & AccessoriesWe work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Corporation. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Corporation. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadratech Jeep Parts, but has no affiliation with Quadratech, Inc. For all of the essential parts to build up your Jeep vehicle, Quadratec is the place to shop.
|
5
|
