Centerforce's patented pressure plates feature centrifugal weights that increase compression of the clutch disc between the flywheel and pressure plate as RPMs increase.
These kits are designed as OE style direct bolt-in replacements.
Centerforce Dual Friction Clutch Kits deliver up to 90% more holding capacity over stock systems and are designed for use with engines producing high horsepower and torque.
Dual Friction Kits are recommended for competition driving and the serious off-roader.
Gas pressure 36mm monotube design eliminates cavitation and foaming for precise steering damping. Reduces steering component vibration to reduce wear and tear of steering components.
Durable corrosion resistant zinc finish and digressive valving. Direct OE replacement is easy to install.
Our Extreme Performance Rotors provide maximum stopping power driving conditions. Cross drilled and slotted rotors run 100-200 degrees farenheit cooler which reduces warping and allows for greater braking power.
In many cases rotor and pad life can also be increased. Combining cross drilled holes and slots enable the braking surface to stay cleaner to provide improved friction bite and cleaner wheels.
The Drilled chamfered holes provide an exit route for gas and dust, resulting in better heat dissipation.
With larger tires you're going to need larger brakes and SSBC has the answer for your Wrangler JK.
SSBC Performance Bake Systems Quick Change Tri-Power Aluminum Caliper Upgrade Kit includes 3 Piston Aluminum Calipers with Stainless Pistons, Hawk Performance HPS Brake Pads and Installation Hardware.
If your JK has already been lifted, but the cornering and steering accuracy are a disappointment to you, AEV's High-Steering Kit is the solution.
By raising the track-bar where it attaches to the front axle, the JK's roll-center is brought closer to its center of gravity.
This minimizes the degree of force the Jeep's body has over the springs, thereby reducing body-roll.
Superior Axle & Gear® is the first company to release a Large Spline Super Axle Kit for the Wrangler JK Model. These fit into all stock Housings!
These are factory designed by real engineers. No copying here. No grinding the Foote Factory name off our axles and calling them some other brand.
Locking differentials have been available for years, but were always a compromise: performing well either off the road or on the road - but not on both. The ARB Air Locker provides normal differential action on the street - maintaining safe, predictable handling. An ARB Air Locker differential will drive out of the most difficult situations.
Don't overlook this important part of your suspension. Increase steering control, especially on lifted vehicles with over sized tires by reducing steering shimmy.
You'll reduce wear and tear on tires and suspension components too.
These New Ball Joints from Synergy Suspension are designed to replace the factory ball joint that is prone to premature failure on lifted Wrangler JKs with large off-road tires. They are Fully greasable sintered metal on bushing design that has high wear resistance which outperforms the factory plastic ball joint assembly. The Ball joint boot is made from tear/wear resistant polyurethane not rubber like OEM. Includes all necessary hardware for installation.
Synergy Suspension Jeep JK Dana 30/44 Inner C Upper & Lower Gusset Kit. Heavy duty 3 sided construction provides for a VERY rigid bracket. Inner Axle Sleeve Kit designed for the 2007+ Jeep JK Dana 44 front axle.
Designed to increase the strength of the Front Dana 44 Axle housing that is prone to bending when larger off road tire are installed and used off road.
Synergy Suspension is the first to bring these to market for the Jeep Wrangler and Wrangler Unlimited JK Rubicon edition Dana Model 44 Axles. 5.38 Gearing allows slower crawling speed for better control.
Also the higher numerically the gearing, the larger tire you can run on your Wrangler JK and still have plenty of power to spare on and off road. As an added bonus these gear sets come with mini installation kits.
Synergy Suspension Jeep JK Dana 30/44 Inner C Upper & Lower Gusset Kit. Heavy duty 3 sided construction provides for a VERY rigid bracket. Inner Axle Sleeve Kit designed for the 2007+ Jeep JK Dana 30/44 front axle.
Designed to increase the strength of the Front Axle housing that is prone to bending when larger off road tire are installed and used off road.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either.