Bolt On Horsepower! The PowerAid Throttle Body Spacers from AIRAID Premium Filter Company are designed to greatly improve the low-end torque and horsepower characteristics of your engine. PowerAid accomplishes this by spacing the throttle body one inch and adding a dyno-proven Helix style bore(s). As the intake air passes through the spacer, the Helix bore creates a vortex action that improves atomization creating a more complete combustion and an efficiently burning engine. The results are improved drivability and increased fuel efficiency.
New for the 2007+ Wrangler is Airaid's new cold air intake for the 3.8L engine. This system features a full length intake tube that draws through a totally redesigned Cool Air Dam. This combination yields an additional 24 lbs/ft of torque (at low rpm) and an additional 14 Horsepower, a plus for all off-road enthusiasts.
Jeep owners need more power, cleaner air filtration from dirt, dust, mud and moisture than any other vehicle on the road today and Volant delivers all this protection demanded by Jeep enthusiasts with it's New High Efficiency Air Intake and Snorkel combination for all JK's. Furthermore, with the Snorkel Combo you can take your JK swimming, transverse deep water crossings, all while protecting your motor from taking a drink. On the top of the Volant Snorkel is a High Polished Aluminum front cover that keeps leaves and large debris from entering the scoop.
Volant, a leader in aftermarket intake design didn't cut any corners when it developed this Wrangler kit. The cross-link polyethylene air box and duct work is engineered to specific of the Wrangler. It insulates and protects the filter from pulling hot air from the engine compartment, thus, increasing horsepower.
Volant has built a complimentary exhaust system that works best with their Cool Air Intake, but can also develop performance on its own. The Volant Exhaust Systems are manufactured from mandrel bent, T304 stainless steel and are precision TIG welded and include a double wall tip.
MagnaFlow Performance mufflers are 100% polished stainless steel and lap-joint welded for solid construction and rugged reliability even in the most extreme conditions. They feature a freeflowing, straight-through perforated stainless steel core, stainless mesh wrap and acoustical fiber fill to deliver that smooth, deep tone.
Banks Ram-Air Intake System replaces the factory's flat panel filter with a large conical lifetime filter that provides maximum high-flow filtration. The Ram-Air's opening dwarfs the stock's inlet, and without the 90-degree detours that choke airflow and kill power. The huge inlet, enclosed housing and much larger tubing reduce restrictions, dramatically improving airflow to the cylinders.
Banks stainless steel Monster Mufflers nearly double the internal flow area of the stock muffler - greatly reducing back pressure. Factory mufflers control noise but increase back pressure in doing so. Banks' large, flow-through design, dampens out undesirable noise without restricting flow, emitting a nice authoritative tone. These high-quality Kits include muffler, tailpipe & all hardware.
Unleash Your Vehicle's Full Power Potential! Every Gibson Header is dynotuned and engineered to deliver more usable horsepower and torque at low and mid-range RPM highway speeds. Improves engine's ability to breathe while lowering operating engine temperatures. Designed as a direct replacement for the factory manifolds, using the stock crossover pipe.
For the enthusiast who wants an awesome look and aggressive powerful sound this split rear bolt-on cat-back exhaust is for you. Gibson's exhaust systems decrease backpressure, allowing the engine to produce more torque, increase horsepower. Typical gains average of 15-20 horsepower.
Gibson now offers a new performance exhaust to enhance the horsepower and torque of the Jeep Wrangler 3.8L engine with a smooth exhaust tone. Each system features 2.50" headpipe, Superflow Performance CFT Muffler- featuring a Chambered & Louvered Design, no packing to blow out, 2.50" mandrel bent tailpipe and finishes with a large 3.50" polished T-304 Stainless Steel tip exiting in stock location. Includes zinc plated hangers, clamps and hardware. Available in high quality aluminized or stainless steel. Easy bolt-on installation with professional looking results. Backed by a Lifetime Limited Warranty.
Exhaust systems have a tough life. Outside, they face salt, mud, water, crud, rocks, among other road hazards! Internally, they experience unburned hydrocarbons, acids, and moisture. All Borla systems feature tough 16-Gauge T-304 Stainless Steel construction. It's so tough that Borla backs each system with a Million-Mile Warranty. Cat-Back Systems run from the rear of the catalytic converter to the end of your vehicle. Adds throaty sound characteristics, and provides mild performance gains with tuned exhaust flow.
Take your Jeep to the next level with the Jeep parts found on our site. We are a leading Jeep accessories retailer, providing performance Jeep parts to our customers. It's a Jeep thing-and we do understand!We work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & Jeep accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & Jeep accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech Jeep Parts, we have no affiliation with either.
