These lights are perhaps the most advanced LED lights on the market. Their aluminum bodies are tough and the fronts feature water tight polycarbonate lenses and stud mounts with vibration dampening rubber cushions. They feature integrated Prime Drive that delivers the most powerful light output per cubic inch on the market.
It may be small, but the 140 LANCE™ can be a wise choice! If you need high performance in a compact package, this is the answer. Off-road comp vehicles often install these as fog, winch, crawling or reversing lights with dispersion filters. Make no mistake, even our smallest light is off-road race ready!
Maxi Light Bar protects windshield frame from tight canyon walls, trees and rocky terrain. It easily pivots to allow any Jeep that fit in the garage before light bar was installed to fit in garage with light bar installed. By pivoting lights down you greatly limit wind noise while on the highways. It also doubles as a sun shield. Holds up to Five lights or antenas.
Anzo's Stealth Vision Performance Lighting combines cutting edge technology with quality, design and affordability. The Hi-Intensity LED technology packs 3500 candlepower in a sleek cast aluminum housing with 6 ultra bright LEDs in a weather tight housing. Get maximum visibility with pure white beams of light that draw such little current that relay's are not required. Installation is easy with included switch and wiring. Anzo's Stealth Vision LED lighting is designed for off-road and show vehicle applications only.
Don't get left in the dark: select Hella's High Performance Bulbs. These precision bulbs offer a Xenon look and produce a brighter, whiter light for increased visibility during night driving. DOT approved.
Lamin-x protective films provide excellent protection from scratches, road debris, and dirt, yet clear enough to not affect light optics. Kits include precut pairs of film for headlights and are available in clear and optic blue for that perfect custom touch.
Warrior Products is very pleased to announce the immediate availability of their JK application of Steel Tail Lights. These steel replacements bolt onto the rear of the vehicle with minimal amounts of cutting into the sheet metal. Light Kits and Load Resistors are available separately.
IPF Performance Lighting developed a replacement headlamp kit to improve the lighting performance and beam pattern over the original equipment head lights for the Jeep Wrangler JK. Comes complete with Housings, Bulbs and Wire Adapter Plugs.
This popular trend has finally arrived for '07 and up Jeep Wranglers! Adds a custom touch that is subtle and clean. Clear Signal Lens Kits are sold in paired sets or a combo kit. Nothing extra to buy.
These traditional looking tail lamps have a clean no-nonsense look of original equipment with the custom looks and performance of solid state LED (light emitting diode) technology.
LED lamps provide a brilliant light that outlasts incandescent bulbs and is the new standard in automotive signal lamps.
Our tail lamps are designed to operate with all existing factory wiring harness connectors and will work flawlessly with your existing signal flasher module.
Olympics Jacklite Brackets easily bolt onto any custom Wrangler JK Front Bumpers, which utilize the eight existing mounting holes in the front of the vehicles frame works.
You have a choice of laying your Jack on either of its two sides and fastening it to a variety of predrilled holes in the Jacklite Brackets.
You can install one pair of lights with the Jack, or two pair of lights without the jack.
Olympic has engineered the auxiliary light mounting position to minimizing visually interference from the drivers view. Along with improved night vision, you'll see more of the fender and tire for precise wheel positioning.
They easily bolt into existing mounting holes in the Windshield Hinges.
Enhance nighttime driving and the looks of your vehicle with our custom light mount brackets and your favorite style auxiliary lamps.
Brackets clamp securely behind the grille and provide clearance for virtually any size and brand of lights.
Constructed from 3/16" plate steel with a satin black powder coat finish. Kits include two light mount brackets, mounting hardware and detailed instructions. Made in USA exclusively for Quadratec.
There's a new star on the road, burning 20% brighter and whiter than standard halogen. SilverStar illuminates with a searing intensity, exceeded only by the more expensive High Intensity Discharge lighting.
SilverStars are the brightest street-legal halogen on the road.
Quality made in the USA.
PIAA is proud to announce the newest addition to their bulb line: PIAA's Xtreme White PLUS H13 bulb with a Kelvin rating of 4000K, providing an intense white light with superior performance. Upgrade today! Dual-filament bulb. LH13 is designed to comply with all DOT, ECE and NAFTA regulations World wide application and use. Engineered for sustained performance in applications where a high level of vibration and moisture protection is required.
Our Euro Style Crystal Eyes Tail Lights are built to the highest quality standards and vacuum tested to make sure lenses are air-tight and three-point inspected before leaving production plants. Sold in Pairs.
New from Rampage Products, the L.E.D lightbar adds attention grabbing style and safety to your Jeep®. Available with or without reverse light option, the bar installs quickly and easily with 3M® tape, with no drilling! L.E.D Bar comes in 49 inch size and plugs into existing flat four trailer hitch wiring.
KC HiLiTES is the dominant force in auxiliary and off road lighting! As the original manufacturer of off road lighting, beginning with the Daylighter®, we have established a rock solid reputation for quality and performance.
This new light bar from KC HiLites is a great way to light up the night with two lights for ’07-’09 Wranglers (not included). Light bar easily mounts to the existing hood hinge bolts for a clean and simple installation.
This cool tubular light bar is constructed with heavy gauge 3" tubing. The mounting brackets are laser cut and formed from 10 gauge material to ensure accurate easy mounting.
MBRP Inc. frame mount light bar comes with two mounting tabs and will hold up to 8" diameter lights.
The Pre-Runner Bar is an easy way to add style to your JK, while enhancing its tough, front-end design features. Installation is easy and secure, with NO DRILLING required. Accessory light mounting locations have been provided for a true Baja inspired appearance. Heavy, welded construction and a durable powder-coated finish for a lifetime of good looks.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either.
exclusively for Quadratec.
