|
 |  | 
 | | | | 
| | | | 
| Introducing the most complete 3.5" lift of it's kind on the market. Heavy duty front and rear leaf springs feature nylon glide pads between each leaf to reduce friction and noise. Front leaf spring packs employ five leafs while rear leafs are comprised of four. Spring eyes are constructed with full military style wraps at both ends for superior strength and dependability. | | | 
| | | | 
| | | | 
| The system utilizes the factory link arm mounts with heavy 5/16" wall replacement links (upper & lower front and lower rear) with rotational urethane ends for unrestricted movement. The Fabtech links feature adjustable ends to enable proper caster and pinion angle adjustments. Replacement front and rear coil springs feature a slightly higher spring rate while maintaining offroad flexibility. Front and rear trac bar relocation brackets maintain proper axle positioning throughout the suspension travel. Additional weld-on trac bar brackets are provided to reinforce weak factory axle mounting points. Extended length bump stop brackets, performance shocks, sway bar links, drop pitman arm, and brake line brackets complete the package. Allows for 37 x 12.50 Tires. | | | 
| | | | 
| Fabtech eliminates the stock link pockets all together so that the upper and lower links can function on the same equal plane. Combine this equal plane geometry with extended length link arms and rotational urethane pivot joints and you have a TJ system that will climb, crawl and walk over just about anything you put in front of it. The extended length link arms mount to a massive one piece welded transfer case crossmember that utilizes the stock transfer case skid plate. Some welding is reccomended during installation. | | | 
| Fabtech's new TJ system is built for the hardcore rock crawler enthusiast demanding maximum ground clearance and articulation. These all new High Clearance Crawler Kits feature Radius Arm front suspension and a 3 Link rear system. Everything is connected by a 1/4" thick Transfer Case skid pan tucked up tight against the frame for incredible ground clearance. This system provides zero caster and u-joint angle change throughout the suspension cycle while providing more ground clearance at the link ends than any other system on the market! | | | | | | | | 
| Fabtech's new TJ system is built for the hardcore rock crawler enthusiast demanding maximum ground clearance and articulation. These all new High Clearance Crawler Kits feature Radius Arm front suspension and a 3 Link rear system. Everything is connected by a 1/4" thick Transfer Case skid pan tucked up tight against the frame for incredible ground clearance. This system provides zero caster and u-joint angle change throughout the suspension cycle while providing more ground clearance at the link ends than any other system on the market!
| | | 
| The system utilizes the factory link arm mounts with heavy 5/16" wall replacement links (upper & lower front and lower rear) with rotational urethane ends for unrestricted movement. The Fabtech links feature adjustable ends to enable proper caster and pinion angle adjustments. Replacement front and rear coil springs feature a slightly higher spring rate while maintaining offroad flexibility. Front and rear trac bar relocation brackets maintain proper axle positioning throughout the suspension travel. Additional weld-on trac bar brackets are provided to reinforce weak factory axle mounting points. Extended length bump stop brackets, performance shocks, sway bar links, drop pitman arm, and brake line brackets complete the package. Allows for 37 x 12.50 Tires. | | | 
| | | | 
| Same great features as the 4" Performance system but utilizes conventional urethane bushings in the link arms rather than the rotational urethane joints. System includes coil springs, bump stops, fixed sway bar links, rear trac bar bracket, pitman arm & shocks.
| | | 
| This system utilizes the factory coil springs with 3" steel coil spacers. With the vast array of cab and motor combinations found in the JK, utilization of the factory coil springs with this system ensures that the vehicle will receive a full 3” of lift to clear 35” x 12.50 R17 tires. This system includes a replacement Pitman Arm, front and rear Trac Bar relocation brackets, Sway Bar mounts, front and rear Bump Stop mounts and more. Proper front-end alignment is insured with this system due to the included adjustable alignment cams. Also included is a front driveshaft boot clamp kit to allow additional clearance between the front driveshaft and transmission during full suspension articulation. | | |
|
$200 Rebate on Select Tires
Dick Cepek Rebate
$50 Off Ox Lockers
Visit SuperTruck Essentials
|
Privacy Policy | Terms of Business | Shipping Policy | Contact Us | Site Map | About Us
©1995-2008, Quadratec Inc. All rights reserved.
 | |
©1995-2008, Quadratec, Inc. All rights reserved. This entire site with its content and parts is copyright protected. All images are invisibly watermarked and cannot be used without explicit agreement from Quadratec Inc.
High Quality Performance Jeep Parts & AccessoriesTake your Jeep to the next level with the Jeep parts & accessories and enhancement products found on our site. We are a leading Jeep enthusiast dealer, providing exceptional performance Jeep parts & accessories to our customers. To improve Jeep suspension or find a unique Jeep part or accessory, simply search our site or contact one of our experienced customer service & parts & accessory representatives. It's a Jeep thing-and we do understand!
Jeep Replacement Parts & AccessoriesWe work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Corporation. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Corporation. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Corporation, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadratech Jeep Parts, but has no affiliation with Quadratech, Inc. For all of the essential parts to build up your Jeep vehicle, Quadratec is the place to shop.
|
5
|
