Upgrade your stock coil and compliment the performance of your MSD Blaster Ignition. Designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! All of them have the same internal specs, but have different housings... more
The MSD 6ALN was designed with NASCAR racing in mind. In fact, the capacitive discharge high power ignition is NASCAR approved! The "N" Series Ignitions feature the mandatory 6-Pin Weathertight connector to meet NASCAR's ignition wiring rule, 20-6.1... more
The heart of this Ignition is a 15 Megahertz micro-controller, making it the fastest of all digital ignitions. The controller analyzes up to 15,000,000 instructions per second! This is over 3x the speed of comparable ignitions and produces the most accurate trigger signals, timing & rev limits possible... more
Pro Billet Distributors begin life as a solid block of 6061-T6 aluminum before being CNC-machined to precise dimensions. The sturdy, flex-free housing is fitted with a sealed ball bearing and long sintered bushing for high rpm accuracy... more
Upgrade your stock coil and compliment the performance of your MSD Blaster Ignition. Designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! All of them have the same internal specs, but have different housings.
To mount your new Blaster Coil, MSD offers a coil bracket. The Bracket is designed to mount to a fender well or firewall. It features a bolt and nut to secure the coil for a durable and good looking mount.
There is nothing worse than losing a race or not making it up a hill due to a coil wire slipping off. To make your coil wire connection full-proof, MSD offers this Coil Wire Retainer... more
Pro Billet Distributors begin life as a solid block of 6061-T6 aluminum before being CNC-machined to precise dimensions. The sturdy, flex-free housing is fitted with a sealed ball bearing and long sintered bushing for high rpm accuracy... more
Factory wires can have up to 3,000 ohms per foot of resistance while the MSD 8.5mm Super Conductor has less than 50 ohms per foot for increased spark delivery! When you also add the improved grip of our Dual Crimp Terminals, heavy-duty boots and heat resistant sleeve compound, you have the best performance spark plug wire available!
Plugs directly into a special Weather tight Connector on the MSD 6-Offroad Ignition Control. Set an rpm limit that will save your engine from high rev damage during driveline failure... more
Some tachometers or factory fuel injection systems may not interface with MSD ignition control. This part corrects problem by producing a signal similar to the factory set up for these applications... more
Upgrade your stock coil and compliment the performance of your MSD Blaster Ignition. Designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! All of them have the same internal specs, but have different housings... more
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either.
