Built by hard core off-roaders for the off-road enthusiast our products are trail tested tough right here in the mountains and deserts of Arizona. Form, fit and functionality are just a few of the areas we take into consideration when manufacturing our complete line of tubular body protection products for Jeeps.
OR-Fab’s Vacuum Pump Relocation Bracket kit moves the factory vacuum pump from the front of the vehicle, to the driver’s side engine compartment on all 12-13 Jeep JK Wranglers... more
Designed to enhance your off road experience by protecting the rear and lower quarter panels of your Jeep from obstacles you will encounter off-road... more
Constructed from tough .120" thick steel tubing and finished with a gloss black powder coating. Modular construction allows for a quick and easy installation... more
OR-Fab's heavy-duty design will accommodate two full Gerry cans and up to a 39" tire without any rattles. Features include a heavy-duty hinge with internal mounting brackets & a lockable draw latch... more
OR-Fab has responded to the increasing popularity of Jeep Cherokee XJ's with a new Heavy Duty Front Bumper for these vehicles. This bumper incorporates a V-shape design that is manufactured from 3/16-inch steel plate, providing strong trail protection that also enhances the vehicle's appearance... more
Or-Fab's heavy duty design will accommodate two full Gerry cans and up to a 39" tire without any rattles. Features include a heavy-duty hinge with internal mounting brackets & a lockable draw latch... more
Stubby Bumpers for Jeep TJ's are a unique design that adds function, maximizes approach angles, and provides superior trail protection. The bumpers are made from heavy-duty 3/16-inch steel plate and include two 3/4-inch D-ring mounts, D-rings, a heavy-duty winch and fairlead mount, and a sturdy jacking point for aftermarket Hi-Lift jacks... more
The OR-Fab Rear Bumper utilizes a body-wrapping design and fit that protects the rear lower quarter panels from damage. OR-Fab Rear Bumpers come with a gloss black powder coat finish and are built from heavy-duty .140" wall tubing... more
Designed to enhance your off road experience by protecting the rear and lower quarter panels of your Jeep from obstacles you will encounter off-road... more
Tubular Bumpers for the Jeep XJ Provide a Rugged, Off-Road Look to Your Jeep. Modular Design, Constructed Using 2" .120 Wall Steel Tubing. Utilizes ¼" Straps to Anchor the Bumper to the Hitch Mounts... more
The OR-Fab Rear Bumper utilizes a body-wrapping design and fit that protects the rear lower quarter panels from damage. Rear Bumpers include a non-rated 2" receiver bracket... more
Stubby Bumpers for Jeep TJ's are a unique design that adds function, maximizes approach angles, and provides superior trail protection. The bumpers are made from heavy-duty 3/16-inch steel plate and include two 3/4-inch D-ring mounts, D-rings, a heavy-duty winch and fairlead mount, and a sturdy jacking point for aftermarket Hi-Lift jacks... more
OR-Fab has developed a new, heavy duty rear bumper for Cherokee XJ's. The bumper features a slim, tapered-edge design that easily slides off rocks and provides greater departure angle clearance... more
Or-Fab's heavy duty design will accommodate two full Gerry cans and up to a 39" tire without any rattles. Features include a heavy-duty hinge with internal mounting brackets & a lockable draw latch... more
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [1]
Built by hard core off-roaders for the off-road enthusiast our products are trail tested tough right here in the mountains and deserts of Arizona. Form, fit and functionality are just a few of the areas we take into consideration when manufacturing our complete line of tubular body protection products for Jeeps. 
