Rock Hard 4x4 Parts JK Oil Pan, Transmission and Dual Catalytic Coverter Skid Plate fastens to the frame in front of both motor mounts and at the main crossover in the rear for maximum protection... more
Rock Hard Rocker Sliders are built for the toughest trails. They are made from 3/16" lazer cut steel plate for accurate fit, extreme strength and designed for minimum loss of ground clearance... more
Rock Hard 4x4 Parts JK fuel tank EVAP canister shield is easy to install, uses factory holes and bolts and protects the canister from damage on the trail.
JK owners know the concern of cracking the fuel canister. Each JK owner needs this relocation bracket. This Rockhard4x4 relocation bracket mounts the fuel canister above the rear axle onto the bottom of the body of the Jeep... more
Rock Hard 4x4 Parts JK Transfer Case Skid Plate gives you the added protection you need for the toughest trails you can wheel on. Made from 3/16" laser cut, CNC bent and jig welded steel plate, you can be sure this skid plate is built with consistent quality and strength... more
Rock Hard 4x4 Parts JK gas tank skid is made from 3/16" steel plate laser cut and CNC bent for a perfect fit. Removal of the factory skid is not necessary as the Rock Hard skid bolts right over it using factory bolts and one additional one on 2-door models and three additional bolts on 4-door Unlimiteds... more
Jeep JK Wrangler Rock Hard Rocker Guards Rock Hard 4x4 Parts JK Rocker Guards have a 4" step of Tread Plate that matches door panels and helps you get in your lifted JK... more
Except no less than the best. Rock Hard 4x4 Parts makes the toughest heavy duty off-road rocks sliders and skid plates in the industry for the JK Wrangler, TJ Wrangler and the XJ Cherokee.
Rock Hard Rocker Sliders are built for the toughest trails. They are made from 3/16" lazer cut steel plate for accurate fit, extreme strength and designed for minimum loss of ground clearance... more
Rock Hard Rocker Sliders are built for the toughest trails. They are made from 3/16" lazer cut steel plate for accurate fit, extreme strength and designed for minimum loss of ground clearance... more
Rock Hard Rocker Sliders are built for the toughest trails. They are made from 3/16" lazer cut steel plate for accurate fit, extreme strength and designed for minimum loss of ground clearance... more
Rock Hard Rocker Sliders are built for the toughest trails. They are made from 3/16" lazer cut steel plate for accurate fit, extreme strength and designed for minimum loss of ground clearance... more
Jeep JK Wrangler Rock Hard Rocker Guards Rock Hard 4x4 Parts JK Rocker Guards have a 4" step of Tread Plate that matches door panels and helps you get in your lifted JK... more
Rock Hard Rocker Sliders are built for the toughest trails. They are made from 3/16" lazer cut steel plate for accurate fit, extreme strength and designed for minimum loss of ground clearance... more
Rock hard 4x4 Cherokee XJ rocker Guards are made from 2" x 3" x .120 Wall Tubing. Ends are Tapered and enclosed. They have 3 brackets that have 3 bolts each mounting them through the pinch rail and 3 braces mounting them to the frame rail... more
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [5]
