Our Rock Rated™ skid plates provide simple installation and solid protection so you can spend less time in the shop and more time on the trail! Whether you have a Jeep, Toyota, or Nissan we have the protection you need! We get between a rock and a hard place!
Replace your factory plastic front bumper cover with this heavy duty 1/8th thick steel skid plate from Skid Row! This 100% bolt-on application means no drilling or welding and can be installed with just simple hand tools... more
This skid plate is designed to protect the vulnerable evaporative canister that Jeep placed in harm's way. It's way too easy to damage this important and expensive emissions component and our canister guard is an easy way to protect it.
This skid plate is made from 3/16" steel and has the front and rear folded at 45 degrees to keep it from catching on edges... more
The Jeep TJ's coil suspension is wonderful, but it leaves the steering box very vulnerable to rocks. Our TJ steering box skid plate bolts on easily and only requires the drilling of one hole... more
These skid plates are made from 1/4" thick steel and reinforced with 1/4" angle to provide beefy protection for your engine's oil pan and your transmission... more
Our transfer case skid plate for your XJ Cherokee or ZJ Grand Cherokee is much stronger than the factory part (if you got one! ) and protects one of the most vulnerable parts of your drivetrain... more
As you may know, your JK came with a driver's side exhaust pipe that makes a complete 360 degree loop. We usually figure that it's cheaper and easier to protect something, than it is to replace it... more
Skid RowÆs Tellico Tough Engine Skid Plates require no vehicle modifications and are specifically designed to work with or without a suspension lift... more
This new engine/transmission skid plate is the first and only one available for your awesome new JK. It is designed to provide complete coverage for your vulnerable engine oil pan, transmission, AND your exhaust system... more
This new engine/transmission skid plate is the first and only one available for your awesome new JK. It is designed to provide complete coverage for your vulnerable engine oil pan, transmission, AND your exhaust system... more
The sway bar on 97-06 Wranglers is located up on top of the chassis leaving the bottom of the radiator exposed. In addition, the factory radiator uses a plastic bottom tank that can be broken leaving you without coolant... more
This skid plate is a cover-up style that bolts over the factory skid plate. This plate simply bolts on right over the original so you don't have to drain your gas tank and remove it... more
As you know, your JK came with a cheap plastic "skid plate" that won't hold up to any offroad use. If you haven't torn it off already, why leave it there? We've got a new replacement that will hold up to real trail use and will protect that cool sway bar disconnect motor... more
These skids are made from 3/16" thick steel on the bottom and sides, are powder coated, and are completely bolt-on. They are designed to work with hitches as you can see in the picture above left... more
Skid RowÆs Tellico Tough Engine Skid Plates require no vehicle modifications and are specifically designed to work with or without a suspension lift... more
These skid plates are made from 1/4" thick steel and reinforced with 1/4" angle to provide beefy protection for your engine's oil pan and your transmission... more
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [2]
Our Rock Rated™ skid plates provide simple installation and solid protection so you can spend less time in the shop and more time on the trail! Whether you have a Jeep, Toyota, or Nissan we have the protection you need! We get between a rock and a hard place! 
