This shift link adapter kit will make shifting your 231 into all low range sectors
simple and fluid. This adapter kit changes the trouble prone stock linkage which
is not reliable due to independent body & drivetrain movement... more
The Extreme Short Shaft kit is what short wheelbase Wrangler owners have been
dreaming of for decades. The Extreme kit not only improves on strength, but also
increases driveshaft lengths by up to 7” over a stock application... more
The kit lowers the transfer
case to help control
driveshaft vibration caused
by increased ride height in
excess of two inches. Fits all
Wrangler models including
Rubicon and Unlimited.
This short shaft kit, or slip yoke eliminator, with the new, heavy duty shaft is engineered to withstand the increased torque (50% increase) generated by extreme reduction of the Tera Low231.
The kit also eliminates the need to lower the transfer case in most cases by increasing the rear driveshaft length by four inches... more
TeraFlex driveshafts are designed as replacements to the factory for the rigors
of off roading and for daily driving responsibilities. They come pre-balanced and
feature premium heavy duty u-joints... more
The Tera Low231 conversion kit is the
solution for providing Wranglers, Cherokees,
and Comanches with low crawl ratios. This kit
provides rock-crawling performance without
affecting high range gears for daily drivers,
or the trip to and from the back country.
It provides a true 4.0:1 reduction through a heavy duty 5 gear planetary system... more
The 2Low kit provides the benefit of true low range gearing, while allowing the front to freely turn. It lets you choose 2 Low in addition to the other standard options... more
This TeraLOW kit uses a six-spline input gear for Dana 20s with MANUAL transmissions. The kit converts the stock 2.03:1 to 3.15:1 for improved rock crawling performance... more
A simple extension is used to position the seal of the automatic transmission pr properly against the transfer case. This kit may be required as needed... more
TeraFlex driveshafts are designed as replacements to the factory for the rigors
of off roading and for daily driving responsibilities. They come pre-balanced and
feature premium heavy duty u-joints... more
TeraFlex driveshafts are designed as replacements to the factory for the rigors
of off roading and for daily driving responsibilities. They come pre-balanced and
feature premium heavy duty u-joints... more
The kit lowers the transfer
case to help control
driveshaft vibration caused
by increased ride height in
excess of two inches. Fits all
Wrangler models including
Rubicon and Unlimited.
TeraFlex driveshafts are designed as replacements to the factory for the rigors
of off roading and for daily driving responsibilities. They come pre-balanced and
feature premium heavy duty u-joints... more
This bracket is designed to allow the factory Rubicon air locker compressor to mount to the TeraFlex BellyUp skidplate. Will fit all Rubicon model TJ Wranglers
and Unlimiteds.
TeraFlex driveshafts are designed as replacements to the factory for the rigors
of off roading and for daily driving responsibilities. They come pre-balanced and
feature premium heavy duty u-joints... more
Take your Jeep to the next level with the Jeep parts found on our site. We are a leading Jeep accessories retailer, providing performance Jeep parts to our customers. It's a Jeep thing-and we do understand!We work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & Jeep accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & Jeep accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech Jeep Parts, we have no affiliation with either.
