« Back to product
Gregory G.
What gauge are the battery cables on this winch?
The power and ground cables are 1 AWG stranded copper (0.2893 in.) This is measured without the wire jacket. Thanks for your inquiry.
James H.
Is this winch compatible with the Quadratec QRC Front / Rear Bumper & Rocker Guards Stubbyl?
Yes, it is. Thanks for your inquiry.
Chad N.
Why do you need to locate the motor in the center or side of the winch? What determines it's placement? Thanks!
Solenoid mounting location is purely personal preference or which style will work best for the type of winch mount and bumper you use. Thanks for your inquiry.
Jacob F.
Hello, I had this winch with the steel cable on my old CJ, I just recently sold. I now have a Grand Cherokee, and want to mount this in a "Hidden" fashion. this will require rotating the clutch lever forward slightly. it looks as if this is possible on this winch. CAN this be done, Rotating the clutch lever by removing its bolts rotate forward and re bolting?
For some winch installations, it may be necessary to rotate the gear housing to make room for clutch handle operation. To rotate the gear housing, remove all the 11 socket cap screws using a 4mm Allen key. Rotate the gear housing to the desired location and reinstall the 11 fasteners. Note: There are 12 different positions at 30° increments allowing a full 360° rotation.
Charles W.
Is the 9000S a side solenoid?
We provide 2 solenoid brackets, so the solenoid can either be mounted in the center or on the side.
GLEN L.
What is the weight of the winch
Hello, this winch weighs just over 60lbs. Thank you for your question.
David M.
Is there a weather proofing IP code for this winch like other manufacturer's have?
Unfortunately Quadratec brand winches do not carry an IP waterproof rating at this time.