Skip to main content
Home » Jeep Bumpers » Front Bumpers » Front Full Width Bumpers » Quadratec QRC Front Bumper
« Back to product
What license plate mount is recommended for this bumper?
Fairlead mounted license plate brackets will be the most convenient without drilling. 12107.0912 is a good option with Hawse fairleads common on synthetic winch line models. Hawse Fairlead License Bracket They are offered for roller fairleads as well. 12190 0920 Roller Fairlead License Plate Bracket Thanks for your inquiry.
In Response to Roy T's question on the blue ox base plate compatibility with this number. I have a 2003 TJ with a Blue Ox base plate for towing with the motor home. I installed this bumper and the base plate still works (note: you have to remove the base plate to install the bumper and then re-install the base plate. I have towed approx 30K miles behind my motorhome with this combination of the QRC Front Bumper and Blue Ox base plate.
Thanks for the constructive feedback on it's successful fit.
I have a 2004 Jeep Wrangler that I would like to flat tow behind my motorhome. I use a Blue Ox tow bar system and would like to know the thickness of the welded on D-Rings tabs. Also do you think I would have any problems hooking up to the welded on tabs to pull behind my motorhome? Thanks
The bumpers D-ring mounting tabs are rated for recovery situations only and are not to be used with a tow bar. Some tow bar base plate set ups look like they may be close to able to mount along with our bumper, but we have not tested the fit with tow bar base plate set ups. The tow bar should not be used directly attached to our tabs for 3/4" D-ring shackles sold separately. Thanks for your inquiry. Added report from customer who has this setup. In Response to Roy T's question on the blue ox base plate compatibility with this number. I have a 2003 TJ with a Blue Ox base plate for towing with the motor home. I installed this bumper and the base plate still works (note: you have to remove the base plate to install the bumper and then re-install the base plate. I have towed approx 30K miles behind my motorhome with this combination of the QRC Front Bumper and Blue Ox base plate. Thanks for the feedback.
will this bumper work with a Quadratec Q-Performance Stealth Winch
Yes, it will. Thanks for your inquiry.
What size shackles would you recommend?
D-Ring Clevis' 3/4" in size with a 7/8" size pin. Thanks for your inquiry.
What winch plate would I need to mount a warn 8274 to this bumper?
The m-8274 specific winch plates have not specifically been tested but it appears it should have a strong chance of working out. The winch plate can be returned. A YJ version is available and should fit as well . If TJ https://www.quadratec.com/products/12113_51_07.htm If YJ https://www.quadratec.com/products/12113_50_07.htm Thanks for your inquiry.
can you flat tow with this bumper?
No. The Bumper recovery points are not rated for flat tow bar usage.
What lights are shown on this bumper?
These are KC hilites brand auxiliary lights. https://www.quadratec.com/products/97048_3510.htm. Thanks for your inquiry.
I purchased this bumper for my 95 YJ two summers ago. Can you point me to the matching rear bumper I could purchase so I'll have a match? Thanks in advance.
Sure can. WIthout the rear tire carrier, it's part # 12057.0212 and with the rear tire carrier, it's part # 12057.0322.
What mounting plate do you recommend for this bumper?
Our flat winch plate 92122.2900 is perfect for this bumper and can be used with either the steel cable or synthetic lines