Skip to main content
Home » Jeep Driveline » Drive Shafts & Hardware » Drive Shafts » Crown Automotive Front Drive Shaft

Crown Automotive 52105884AA Front Drive Shaft for 00-04 Jeep Grand Cherokee WJ with 4.0L Engine

Quadratec Part #: 52302-0026
Crown Automotive Part #: 52105884AA
Description
If your Jeep Grand Cherokee's front drive shaft is bent or you feel its easier to just replace the entire shaft when a joint goes bad, then the Crown Automotive Front Drive Shaft will get you back out on the road. As a factory replacement this shaft has the same CV joint on the transfer case end and u-joint at the axle. These joints allow for maximum suspension articulation that the factory had in mind. If a there is an issue with your original shaft you will hear clicking while driving or may feel a vibration that changes with speed. These issues left unattended to could do further damage to axle components or the transfer case.
Details

Factory Replacement: Made to the same length and standards to guarantee it runs like the original and does not need any additional yokes or flanges to install.

Full Assembly: Balanced at the factory joints installed

For Stock Suspensions: The length this is made to accommodate factory suspensions and drivetrains.

Installation Notes
Installation Difficulty:
Skill Level 3 IconLevel 3Advanced
Installation Time: 1-2 hours
Parts Included

Drive Shaft

Warranty
12 Month/ 12,000 Mile Warranty
  • Engine: 4.0L, 4.7L
  • Transmission: Automatic, Manual
  • Location: Front
  • Shipping Weight: 17lb
  • Shipping Dimensions: 37in x 5in x 5in (L x W x H)
  • Jeep Grand Cherokee (WJ)

  • 2004 Jeep Grand Cherokee (WJ)
  • 2003 Jeep Grand Cherokee (WJ)
  • 2002 Jeep Grand Cherokee (WJ)
  • 2001 Jeep Grand Cherokee (WJ)
  • 2000 Jeep Grand Cherokee (WJ)
Vehicle Build Dates: 12/13/00 Through 2004
Share Your Thoughts
Review Summary
Shared Media
Questions

Customer Submitted Photos

Crown Automotive Front Drive Shaft Reviews