Crown Automotive RT25003 Weld On Shock Mounts for 3" Axle Tubes
Quadratec Part #:
56000-0000
Crown Automotive Part #:
RT25003
Description
Finish your axle swap or custom rear suspension project with these weld on shock mounts from Crown Automotive.
Popular Similar Items
Details
- Axle Side Shock Bracket Set
- Sold in Pairs
- Features Half Inch Bolt Hole
- CNC Cut 3/16"" Thick Plate Steel
- 1.5" Inside Diameter
- Cut for a 3" Axle Tube
- Designed for Shock Bushing to Mount Parallel to Axle Tube
- Shock Hole Measures 2-7/8" From Axle Tube
- Bare Steel
- Axle Position: Rear
- Color: Bare Steel
- Shipping Weight: 3lb
- Shipping Dimensions: 6in x 3in x 3in (L x W x H)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Weld On Shock Mounts Reviews
Santiago M.
10/5/2021
Fit perfect
Derek P.
8/24/2021
Worked great
BRIAN D.
1/4/2020
Replaced old rusty mounts on my YJ’s dana 30 with these. Contour fit axle housing perfectly. They’re maybe a half inch shorter than the stock mounts. They’re solid, well-made. Theres only milscale on them so you’ll need to paint them after welding.
Questions
Michael P.
Hello, will these work with an explorer 8.8 (31 spline) axle tube?
Ford 8.8 rear axles are closer to 3-1/4" so you should be able to use these brackets, some grinding of the bracket may need to be done for a tight fit.
Michael P.
Will these fit in a ford 8.8?
These are for 3" diameter tubing. The Ford 8.8" has 3.25" diameter tubing.
Matt S.
Hi will these bracket fit a 2014 Jeep jku?
Thanks...
Matt
Yes they will work on any of the Dana axles that are factory to the JK Wrangler