Poison Spyder BFH II Rear Bumper with Receiver & Shackle Tabs for 07-18 Jeep Wrangler JK

Plate Steel Construction
The BFH™ II Rear Bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH™ II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used.

High Clearance & Departure Angle
The faceted plate steel design of the JK BFH™ II Rear Bumper provides the most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the stock rear crossmember. At the installer's discretion, the stock rear crossmember may be plated across the open cut (materials to do this are not included), or the crossmember removed completely.

Hitch Receiver Compatibility
This version of the JK BFH II Rear Bumper is designed to work with the JK BFH™ II Rear Crossmember - Receiver to provide a hitch receiver as a convenient recovery attachment or tow point. Note that the hitch receiver is NOT integrated into the bumper itself—it is part of the crossmember, the bumper simply has a slot for it to pass through.

High Clearance Shackle Tabs
The JK BFH™ II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to anable sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles (sold separately).

Recessed LED Light Mounts
This specifc part number includes recessed mounting tabs for a pair of high intensity rearward-illuminating 6" LED light bars. The mounts were specifically designed to fit the form factor of Rigid Industries SR-6 (single row, 6") LED light bars, which Poison Spyder recommends. However they should fit any brand of single-row LED light bar that matches Rigid's 7-5/8" mounting flange dimensions. The recessed mounting protects the LED light bar behind the sturdy 3/16" steel shell of the BFH™ II bumper. This bumper is also available without the recessed LED light mounts, under different part numbers.