Home » Jeep Bumpers, Towing, Racks » Front Bumpers » Front Full Width Bumpers » Smittybilt Front XRC Bumper with Q9000s Self Recovery Winch & Dyneema® Synthetic Rope for 87-06 Jeep® Wrangler YJ & TJ

Smittybilt Front XRC Bumper with Q9000s Self Recovery Winch & Dyneema® Synthetic Rope for 87-06 Jeep® Wrangler YJ & TJ

Quadrapacs - Save big with our exclusive package deals!
Save $75! Smittybilt XRC Front Bumper with Q9000s Winch with Synthetic Rope!
The new XRC Bumper line was engineered to provide increased clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance. Each bumper is manufactured from 3/16" cold rolled steel and then robotically welded to the exact specifications. All the welds are ground down and smoothed out and then a two stage powder coat is applied for the ultimate look. The textured matte powder coat finish offers a truly custom look! The front stinger is manufactured from 1.75 tubing and has two light tabs that can accommodate up to two 9" lights. Your winching needs are also met as each bumper comes with an integrated winch plate.
Quadratec's legendary Q-Series Winches are now available with Dyneema® winch line; an ultra high molecular weight polyethylene fiber developed in the Netherlands over 20 years ago. All Quadratec Winches are manufactured in our state of the art ISO 9001 factory and are CE certified for our international customers. Synthetic winch lines are a real game changer in off road recovery. Despite being softer and flexible, Dyneema® is stronger and more durable than winch steel cables. In fact, when properly cared for, Dyneema® winch lines will outlast steel winch cables. Weight for weight, Dyneema® is 15 times stronger than steel and its light weight significantly improves the ease of handling. It even floats and is an obvious benefit when winching in water conditions. Dyneema® will not rust, kink and lose strength like steel cables. Handling steel cables can sometimes result in wire splinters but synthetic winch lines are much safer and easier to use. In the unlikely event of a synthetic winch line break, there is virtually no recoil, unlike steel wire where recoil is extremely dangerous. The ease of handling, increased safety and improved longevity of Dyneema® are why so many off road enthusiasts are making the switch. Each Synthetic Series Winch features 90' of Synthetic winch line with a 12' ballistic nylon chafe guard to protect your winch line from abrasions. Each winch line is 3/8" diameter and rated for 18,000 lbs. Other features include a billet aluminum hawse fairlead, deluxe winch hook and Winch Operator's Guide which includes helpful information on winching and the care and use of synthetic line.
Q9000s Self Recovery Winch

    Features Included:
    1 Hefty Clutch Control
    2 Case Hardened Input Gears
    3 Case Hardened Intermediate Gears
    4 Case Hardened Output Gears
    5 Stainless Steel Hardware Throughout
    6 Case Hardened Hex Drive Shaft
    7 Load Holding Brake System
    8 Winch Drum is Case Hardened
    9 High Strength Aluminum Tie Bars
    10 Shaft Coupler is Case Hardened
    11 Solid Copper and Brass Power Terminals
    12 Durable Powder Coat Finish
    13 Powerful 4.8 Horsepower Series Wound Motor
    14 Heavy Duty Solenoid with 2 Bracket Locations
    15 Dyneema® Synthetic Rope 90' x 3/8"
    16 Stainless Steel Safety Latch
    17 Forged Steel Clevis Hook
    18 Nylon Safety Hook Strap
    19 High Visibility Rubberized Winch Remote with 12' Cord
    20 Solid Copper Battery Cables
    21 Aluminum Hawse Fairlead

    XRC Front Bumper

      Its unique design is capable of mounting a winch with a rated line pull of up to 10,000 lb., with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to the vehicle. Now available with a complete line of XRC Bumpers, Corners, Fenders and Rockers.
    Installation Notes
    Installation Difficulty:
    Level 2Intermediate
    Installation Time: 2-4 hours
    Parts Included
    • XRC Front Bumper with Integrated Winch Plate
    • Q9000s Winch
    • Aluminum Hawse Fairlead
    • 90' x 3/8" Dyneema® Synthetic Rope
    • Forged Steel Clevis Hook
    • Nylon Safety Hook Strap
    • 12' Wire Remote Control
    • Remote Solenoid Box
    • Motor Mounted Solenoid Box Mount
    • Center Mounted Solenoid Box Mounts
    • Installation Hardware
  • Features: Bumper Hoop
  • Color: Black
  • Style: Mid Width Bumper
  • Material: Steel
*Please make a selection above to view specs on a specific product
  • Jeep Wrangler (TJ)

  • 2006 Jeep Wrangler (TJ)
  • 2005 Jeep Wrangler (TJ)
  • 2004 Jeep Wrangler (TJ)
  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
  • Jeep Wrangler Unlimited (TJ)

  • 2006 Jeep Wrangler Unlimited (TJ)
  • 2005 Jeep Wrangler Unlimited (TJ)
  • 2004 Jeep Wrangler Unlimited (TJ)
Part NumberCatalog #Year RangePrice
12057.200597-06 Jeep® Wrangler TJ$794.98
12057.200687-95 Jeep® Wrangler YJ$794.98
Share Your Thoughts
Review Summary
Shared Media