Home » Lange Originals® 014-388 Manual Hoist-a-Top® for 76-06 Jeep® CJ-7 & Wrangler YJ, TJ with One Piece Hardtop

Lange Originals® 014-388 Manual Hoist-a-Top® for 76-06 Jeep® CJ-7 & Wrangler YJ, TJ with One Piece Hardtop

Catalog #: 12020.01.07
Lange Originals® Part #: 014-388
Description

This hardtop hoist is the one. Easy one person operation makes the job "child's play". Rugged construction and a powerful safety-featured lifting device are included. Your top will not require any modifications to use this hoist. Works with CJ-7, Wrangler factory or Sierra hardtops. Rubber coated hooks and foam covered hardware protect your valuable hardtops finish. The high-tensile steel cable design should not be confused with cheaper rope and pulley hardtop hoists sold elsewhere.

Details

Hoist-a-Top uses an incredibly strong steel frame that quickly attaches to your vehicle top. There is nothing to drill or attach to your top. A specially designed cable pulling mechanism then lifts your top to the ceiling in your garage or carport for convenient, out-of-the-way storage. It takes only about three minutes to remove your top, by yourself. Replacing it is just as easy. With a working range of from 7 to 10 feet, Hoist-a-Top handles top removal and storage in most garages. Hoist-a-Top is a complete turnkey system. Installation is simple and their custom systems come complete with excellent installation instructions. No more pulled muscles, strained backs, dropped or damaged tops, or pinched fingers. Best of all, you don't have to find a group of people to help every time! Hoist-a-Top is available with a manual or power lift. The manual method features a hand cable pull. The new power hoist option uses a 110 Volt winch to lift and lower the top easily with power. A Hoist-a-Top Power Unit upgrade is available for owners of the manual Hoist-a-Top that want the convenience of a power lift.

Installation Notes
Installation Difficulty:
Level 3Advanced

Tools Needed:
Electric drill with 3/8" bit
Phillips screw driver
Adjustable wrench
Measuring tape
Pencil

Installation Time: 1-2 hours
Parts Included

Wire Cable Puller
Hoist Frame T Section
Two Frame Arms
Center Frame Arm with Balance Slide
Two ½” Eye Bolts with lag screw ends
Six #4 Screws
Three End Caps
Three 3/8" Nylon Capture Nuts
Two Rubber Coated J Hooks
Rubber Coated L Hook
Three Foam Top Protectors
3/8" Eye Bolt

  • Jeep Wrangler (TJ)

  • 2006 Jeep Wrangler (TJ)
  • 2005 Jeep Wrangler (TJ)
  • 2004 Jeep Wrangler (TJ)
  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
  • Jeep CJ-7

  • 1986 Jeep CJ-7
  • 1985 Jeep CJ-7
  • 1984 Jeep CJ-7
  • 1983 Jeep CJ-7
  • 1982 Jeep CJ-7
  • 1981 Jeep CJ-7
  • 1980 Jeep CJ-7
  • 1979 Jeep CJ-7
  • 1978 Jeep CJ-7
  • 1977 Jeep CJ-7
  • 1976 Jeep CJ-7
  • Jeep Cherokee (XJ)

  • 1993 Jeep Cherokee (XJ)
  • 1992 Jeep Cherokee (XJ)
  • 1991 Jeep Cherokee (XJ)
  • 1990 Jeep Cherokee (XJ)
  • 1989 Jeep Cherokee (XJ)
  • 1988 Jeep Cherokee (XJ)
Share Your Thoughts
Review Summary
Shared Media
Questions