Rugged Ridge Q-Series Winch with Rugged Ridge Winch Mount Modular XHD Front Bumper for 76-06 Jeep CJ-5, CJ-7, CJ-8 Scrambler, Wrangler YJ, TJ & Unlimited

Q Series Winch
Our engineers work directly with the factory to provide solutions which are specifically tailored to your Jeep®. Our powerful 4.8hp series wound motor and class leading low gear ratios give fast line speed with a Battery Friendly low current draw. You will get the most winching time from your available state of battery charge. We give you an industry best Limited Lifetime Warranty on mechanical parts and a 1 year Warranty on all electrical components. Detailed installation instructions and a handy glove compartment sized Owners Manual with Winching Guide are included. All Q Series Winches with remote solenoid include two sets of solenoid brackets for side mounting or top mounting.
Features Included:
1 Hefty Clutch Control
2 Case Hardened Input Gears To HRC 30-38*
3 Case Hardened Intermediate Gears To HRC 43-48*
4 Case Hardened Output Gears To HRC 43-48*
5 Stainless Steel Hardware Throughout
6 Case Hardened Hex Drive Shaft To HRC 38-42*
7 Load Holding Brake System
8 Winch Drum is Case Hardened To HRC 55-58*
9 High Strength Aluminum Tie Bars
10 Shaft Coupler is Case Hardened To HRC 30-38*
11 Solid Copper and Brass Power Terminals
12 Durable Powder Coat Finish
13 Powerful 4.8 Horsepower Series Wound Motor
14 Heavy Duty Solenoid
15 Cable or Synthetic Rope
16 Stainless Steel Safety Latch
17 Forged Steel Clevis Hook
18 Nylon Safety Hook Strap
19 High Visibility Rubberized Winch Remote with 12' Cord
20 Solid Copper Battery Cables
21 Fairlead
* Rockwell Hardness.

Rugged Ridge Winch Mount Modular XHD Front Bumper in Textured Black
The Center Base section is the foundation of the XHD Bumper System and stands alone as excellent bumper for those on a budget. Available with integrated winch mount for most popular winches including WARN® PowerPlant (with optional mounting blocks). The Winch Mount Center Base design attaches to existing bumper mounts with two custom D-Ring mounting plates that "sandwich" the bumper securely to the frame. Center Base section features fog lamp provisions with laser cut euro-guards. Also Includes side block-out plates to finish ends when installed by itself. A durable textured powder coat finish is applied over e-coated steel construction for lasting durability.

Installation Notes

Installation Difficulty:

Level 2Intermediate

Installation Time: 1-2 hours

Parts Included

Q Series Winch
Fairlead
Cable or Synthetic Rope
Forged Steel Clevis Hook
Nylon Safety Hook Strap
12' Wire Remote Control
Solenoid
Installation Hardware
Front Bumper Center SectionSection