Kargo Master Congo Cage for 04½-06 Jeep Wrangler TJ Unlimited

Wrangler owners with a load to carry, rejoice! Finally a reasonably priced Jeep rack that is strong enough to get the job done. The Congo Cage provides a rock solid foundation for Kargo Master Safari Racks, Jeep Rack Utility Crossbars, Yakima and Thule bars, and a host of other cargo management devices. The perfect Jeep roof rack to carry canoes, kayaks, surfboards, snowboards, and other tools of the trade.Bigger Tubes-Stronger Frame

• Big 1.625" Diameter x .083" Steel Tube Is The Strongest Available
• 500 Lb. Cargo Capacity
• Nationwide Lifetime Frame Warranty
• Clean 4" Swaged Joints Double Tube Thickness At Stress Points
• Yellow Zinc Plated Grade 5 Fasteners For Added Strength And Corrosion Resistance

Premium Powdercoat Finish

• THIS IS HUGE!!!!!! All Jeep racks and SUV roof racks are NOW either Yellow Zinc Chromate Plated or Zinc Epoxy Primed beneath a marine grade powder coat finish that is specially formulated to resist corrosion and abrasion. THIS IS THE MOST RUST RESISTANT FINISH IN THE INDUSTRY.
• Will not fade or dull

Other Cool Features

• Unique front and rear mount brackets use existing windshield hinge and tail light holes. Drilling not required.
• Jeep rack removes easily with 4 bolts
• Hinged rear brackets allow installation/removal of Jeep hard or soft top without removing Jeep rack.
• Unique indented top rails reduce overall vehicle height and make it easier to load/unload cargo.
• Accessory brackets available to mount our Jeep Rack Utility Crossbars or Yakima CrossbarsKargo Master Assembly & Mounting for Safari Rack on Congo Cage is required for mounting Bushman Steel Racks to Congo Cage.

Installation Notes

Installation Difficulty:

Level 3Advanced

Drilling required.

Tools Needed:
Power Drill
5/16" drill bit

Installation Time: 2-4 hours

Installation
Instructions

Parts Included

Two Cross Tubes
Front "U" Bar
Front Legs
Front Mount Plates
Rear "U" Bar
Rear Legs
Rear Leg Mount Plates
Two 1/2" x 3/4" Hex Bolts
Two 1/2" Lock Washers
Two 1/2" SAE Flat Washers
Two 5/16" x 5" Hex Bolts
Two 5/16" x 1 1/4" Hex Bolts
12 5/16" Nyloc Nuts
Ten 5/16" Flat Washers
Eight 5/16" x 2" Button Head Bolts
Six 1/4" x 20 x 1" Thread Cutting Screws
Six 1/4" Lock Washers
Six 1/4" SAE Flat Washers
Eight 5/16"-18 x 1" Flat Head Allen Bolts
Two 5/16"-18 x 1" Button Head Bolts
Two 5/16" Lock Washers

Warranty

Limited Lifetime Warranty.