GenRight Off Road CNR-1013 Off Road Aluminum Extended Wheelbase Full Corner Guards for 76-86 Jeep® CJ-7
Catalog #: 12248.0528
GenRight Off Road Part #: CNR-1013
This is the GenRight Off Road Full Corner Guard set for the Jeep CJ-7. These are a direct bolt-on and a perfect upgrade to better protect your Jeeps tub. This model is an ideal choice when stretching your rear axle back to keep the wheel opening centered over the re-located axle. Why do you need that? So you can maintain that clean factory look without adding a lot of weight and be able to re-mount the rear flares. Perfect for adding much needed protection when playing in the rocks or to cover up previous trail damage.
Made in the USA!
Made in the USA!
- Wheel opening is stretched to the rear of the Jeep by 4".
- Laser cut from 3/16" thick solid 6061 aluminum.
- The 90 degree bend is formed with a single "hit" die on a CNC press brake to assure this product matches the shape of your Jeeps tub.
- Stock wheel opening "shape" is retained to fit a stock CJ fender flare or the GenRight metal tube rear flare and remain street legal.
- Each set of panels has the factory mounting holes laser cut in for the tail lights and gas filler to make installation quicker.
- The mounting holes are pre-drilled and countersunk (GenRight uses 2 more mounting bolts than other brands) to secure the corner to the tub.
- Includes large 5/16" size countersunk stainless steel bolts (flush type) to securely mount GenRights corners to protect your Jeeps tub and look clean.
- Fits on top of most 6 tall after market 3/16 thick rocker guards.
Installation Difficulty:Level 3Advanced
- The stock license plate mounting holes have been removed from the drivers side panel because the stock location is much to vulnerable. We recommend using GenRights license plate relocation bracket/light kit to get the license plate moved into the center of the spare tire.
- This product requires drilling of the body/tub to properly mount them.
- The stock rear flare mounting holes have been removed from these panels. If you are installing rear flares, you will need to drill new mounting holes in the corner guard panel.
- Wheel openings (on corner guard and body) can be trimmed to fit bigger tires.
- We do not make a model specifically for Hi-Fender flares, the wheel openings will need to be trimmed to match the tube flare by the installer.
- The Full Corners are sold un-painted and should be fully fitted (then removed) for painting.
- Sorry, this model will not fit a CJ-5.
Installation Time: 4-8 hours
1 Pair of Corner Guards
- Color: Raw Aluminum
- Armor Type: Rear Corner
- Material: Aluminum
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7