Home » Jeep Armor & Protection » Rear Corner Protection » GenRight Off Road CNR-2003 Off Road Steel Extended Wheelbase Full Corner Guards for 97-06 Jeep® Wrangler TJ

GenRight Off Road CNR-2003 Off Road Steel Extended Wheelbase Full Corner Guards for 97-06 Jeep® Wrangler TJ

Catalog #: 12248.0537
GenRight Off Road Part #: CNR-2003
Description
This is the GenRight Off Road Full Corner Guard set for the Jeep Wrangler TJ. These are a direct bolt-on and a perfect upgrade to better protect your Jeep’s tub. This model is an ideal choice when stretching your rear axle back to keep the wheel opening centered over the re-located axle. Why do you need that? So you can maintain that clean factory look and be able to re-mount the rear flares.
Made in the USA!
Details
  • Wheel opening is 4" further back towards the rear of the Jeep.
  • Laser cut from 3/16" thick solid steel plate, just like GenRights rock sliders.
  • The 90 degree bend is formed with a single "hit" die on a CNC press brake to assure this product matches the shape of your Jeeps tub.
  • Stock wheel opening "shape" is retained to fit a stock TJ fender flare or the GenRight metal tube rear flare and remain street legal.
  • Each set of panels has the factory mounting holes laser cut in for the tail lights, tailgate hinges and gas filler to make installation quicker.
  • The mounting holes are pre-drilled and countersunk (GenRight uses 2 more mounting bolts than other brands) to secure the corner to the tub.
  • Includes large 5/16" size countersunk stainless steel bolts (flush type) to securely mount GenRights corners to protect your Jeeps tub and look clean.
  • Fits on top of most 6” tall after market 3/16” thick rocker guards.
Installation Notes
Installation Difficulty:
Level 3Advanced
  • The stock license plate mounting holes have been removed from the drivers side panel because the stock location is much to vulnerable. We recommend using GenRights license plate relocation bracket/light kit to get the license plate moved into the center of the spare tire.
  • This product requires drilling of the body/tub to properly mount them.
  • The stock rear flare mounting holes have been removed from these panels. If you are installing rear flares, you will need to drill new mounting holes in the corner guard panel.
  • Wheel openings (on corner guard and body) can be trimmed to fit bigger tires.
  • We do not make a model specifically for Hi-Fender flares, the wheel openings will need to be trimmed to match the tube flare by the installer.
  • The full corners are sold un-painted and should be fully fitted (then removed) for painting.
Installation Time: 4-8 hours
Parts Included

1 Pair of Corner Guards
Installation Hardware

  • Color: Bare Steel
  • Armor Type: Rear Corner
  • Material: Steel
  • Jeep Wrangler (TJ)

  • 2006 Jeep Wrangler (TJ)
  • 2005 Jeep Wrangler (TJ)
  • 2004 Jeep Wrangler (TJ)
  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
Share Your Thoughts
Review Summary
Shared Media
Questions