Home » Jeep Armor & Protection » Rocker Guards » Poison Spyder Steel Brawler Rocker in SpyderShell™ Armor Coat for 07-16 Jeep® Wrangler Unlimited JK

Poison Spyder Steel Brawler Rocker in SpyderShell™ Armor Coat for 07-17 Jeep® Wrangler Unlimited JK

The Quadratec® Difference
Catalog #: 12252.2082
Poison Spyder Part #: 17-08200P1
Jeep JK's are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers™ provide the ultimate rocker armor protection while actually enhancing your Jeep's off-road capability. Brawler Rockers are two-piece "mini-boat side" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor™. The lower piece incorporates an extremely strong rub rail that protrudes about 3¼" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate steel angles down and inward to form a high clearance boat side for sliding off of rocks and obstacles. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker™. Oval lightning holes along the length of the boat side section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares™. Available in SpyderShell Armor Coat which is an industrial grade, “super-durable” architectural finish in semi-gloss black. SpyderShell Armor Coat is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor after-market manufacturer.
The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers™ in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker™ to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts.

Brawler Rockers are designed to handle a serious beating! They not only provide unmatched rocker protection, but they also provide a super strong pivot point which can help you to maneuver through tight obstacles. The boat side design will allow the Jeep to slide off of rocks and back onto the center of the trail. The protruding rub rail keeps vertical obstructions such as trees and rock walls a safe distance from the Jeep's doors and other vulnerable body parts. And when you need to change a tire or perform an extraction, the Brawler Rocker provides a strong, convenient lifting point for your Hi-Lift jack.

SpyderShell Armor Coat
Poison Spyder’s SpyderShell Armor Coat has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Their proprietary 5-stage system starts with media blasting the entire part, to remove contaminants and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black--rather than traditional gray--so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, “super-durable” architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor after-market manufacturer, for which Poison Spyder are confident in offering a 5-year warranty on materials and workmanship.
Installation Notes
Installation Difficulty:
Level 3Advanced
Parts Included
Rocker Guards
  • Features: Step
  • Color: Black
  • Armor Type: Rocker Guards
  • Material: Steel
  • Jeep Wrangler 2-Door (JK)

  • 2017 Jeep Wrangler 2-Door (JK)
  • 2016 Jeep Wrangler 2-Door (JK)
  • 2015 Jeep Wrangler 2-Door (JK)
  • 2014 Jeep Wrangler 2-Door (JK)
  • 2013 Jeep Wrangler 2-Door (JK)
  • 2012 Jeep Wrangler 2-Door (JK)
  • 2011 Jeep Wrangler 2-Door (JK)
  • 2010 Jeep Wrangler 2-Door (JK)
  • 2009 Jeep Wrangler 2-Door (JK)
  • 2008 Jeep Wrangler 2-Door (JK)
  • 2007 Jeep Wrangler 2-Door (JK)
Share Your Thoughts
Review Summary
Shared Media