For 4.0L Engine for 90-06 Jeep® Wrangler YJ, TJ, Unlimited & Cherokee XJ
Quadratec Part No: 12523.100 Manufacturer Part No: 560-250 $62.99
Don't risk walking home. Whether you're on the trail or on the highway, your oil pan is too vulnerable to take a chance. Protect It! The Rock-ItTM Oil Pan Skid Plate is made of Heavy Duty .125 tough steel plate. Designed for optimum strength and protection, this is a must for any Jeep«. Too many exposed, unprotected Jeep oil pans have fallen victim to road debris and other highway hazards. Rocks on trails are the expected hazards. Don't take the risk, protect your Oil Pan with the low cost, simple solution. No hardware is required to install, and no tools are necessary! Simply use 5 minute permanent adhesive. The open design allows accumulated dirt to be simply washed out from open the front through to the open rear. There is no chance of rusting out oil pan with clogged soggy dirt and trash. Features easy access to the oil drain plug.
Don't risk walking home. Whether you're on the trail or on the highway, your oil pan is too vulnerable to take a chance. Protect It! The Rock-ItTM Oil Pan Skid Plate is made of Heavy Duty .125 tough steel plate. Designed for optimum strength and protection, this is a must for any Jeep«. Too many exposed, unprotected Jeep oil pans have fallen victim to road debris and other highway hazards. Rocks on trails are the expected hazards. Don't take the risk, protect your Oil Pan with the low cost, simple solution. No hardware is required to install, and no tools are necessary! Simply use 5 minute permanent adhesive. The open design allows accumulated dirt to be simply washed out from open the front through to the open rear. There is no chance of rusting out oil pan with clogged soggy dirt and trash. Features easy access to the oil drain plug.
The Wranglers and Cherokees with the 4.0 engine do not come with an engine oil pan guard. This plate is designed to protect the oil pan from flying debris impacts both on and off the trail. Take a look from the contact path of your front tires up towards the oil pan, anything flipped up by the tire has a direct shot at the pan. This plate is made from 1/8" steel plate and is bonded to the oil pan with adhesive. Direction should be followed with installation, and once properly installed is nearly imposable to remove. Does not interfere with oil drain.
Weight: 7.00 lbs.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [1]
