Quadratec Part No: 12700.414 Manufacturer Part No: 4354410 $561.99
The TeraFlex disc brake kit is manufactured within exact tolerances to provide the crucial stopping power that larger tires, and extreme off road situations demand. The TeraFlex disc brake kit is ideal for anyone wanting to upgrade a quality disc brake package to their axles. This disc brake kit is intended for use as a bolt-on upgrade to replace factory Jeep® drum brakes. The internal drum parking brake provides outstanding holding power when compared to other disc brake conversions.
Fits all Jeep® YJ factory rear Dana 35 non-c-clip axles 1987 through 1991 . Also fits XJ Cherokee non-c-clip rear axles from and XJ Dana 44 axles up through 1988.
The heavy duty caliper is designed to offer
superior stopping power compared to the
stock drum configuration.
The caliper is manufactured using a tight tolerance casting process. The machined surfaces allow the piston to effectively transfer
heat for proper cooling.
The integrated emergency brake system
makes the disc brake conversion a simple
and easy modification. The emergency
brake is designed to work with the integrated
drum cast and machined into the rotor. New E-Brake Cables are available separately for a no hassle conversion.
The late model Jeep® specific bolt pattern
backing plate is designed from heavy duty
steel for superior strength, and the dust
shield keeps debris from reaching critical
braking components.
The rotor is designed to offer excellent
heat dissipation, with resistance to cracking.
The rotor is machined on the disc mounting
surface as well as the integrated emergency
brake surface to ensure parallel and even
braking performance. Dual bolt pattern (5x4.5
& 5x5.5) allow multiple wheel choices.
Early Model Jeep Bolt Pattern Shown
Notes:
This kit does not work with ABS sensors. You will not be able to install the ABS
sensors into the disc brake mount backing plate.
Some factory Jeep® 15” Wheels may rub on the caliper. Do NOT operate the
vehicle until you confirm adequate caliper/wheel clearance.
TeraFlex does not make any Disc Brake Kits to fit factory Jeep® axles built prior to the YJ Wrangler, except for the XJ Cherokee axles.
The years between 1987 and 1991 are the dark years where anything is possible
from Jeep®, so check the bolt pattern with the drawing before ordering a kit.
If you don’t want to replace the wheel bearings it is okay to cut a slot in the preload ring and slide it over the axle shaft.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either.
