Home » Jeep Lift Kits & Suspension » Track Bars » Adjustable Rear Track Bars » JKS Manufacturing JKSOGS151 Rear Adjustable Trackbar for 97-06 Jeep® Wrangler TJ & Unlimited with 0-6" Lift

JKS Manufacturing JKSOGS151 Rear Adjustable Trackbar for 97-06 Jeep® Wrangler TJ & Unlimited with 0-6" Lift

Catalog #: 16007.006
JKS Manufacturing Part #: JKSOGS151
Description
The JKS Adjustable Trackbar is an essential upgrade to any lifted Jeep® still using the OE trackbar. The length is easily adjusted to perfectly center the axle housing beneath the vehicle. Unlike relocation brackets, our Adjustable Trackbar is compatible with virtually any suspension system and allows constant changes as vehicle modifications require.
Details

The ends of each JKS Adjustable Trackbar feature bushings specifically chosen to provide maximum off-road performance while minimizing the transfer of road noise and vibrations. A Johnny Joint® spherical polyurethane (2.0" or 2.5"), Dura-Thane™ performance polyurethane or OE rubber bushing is used, depending on each application's requirements.
Manufactured from 1.25" x 0.250" DOM tubing, JKS Adjustable Trackbars are bent to OE specifications for proper geometry and clearance. A zinc plating and durable powdercoat finish provide excellent protection from corrosion and trail debris.
The trackbar controls lateral movement of the axle housing...
It is attached to the chassis and axle on opposite sides of the vehicle with flexible mounting points to accommodate suspension travel. Unfortunately, the fixed length of the OE trackbar won't accommodate ride height adjustments. Changing the distance between mounting points forces the axle housing out of alignment with the rest of the vehicle. Unless corrected, this condition will place unnecessary stress on related suspension and steering components, create alignment problems, and prevent proper suspension & swaybar disconnect operation.

Properly aligns axle housing with chassis on coil sprung Jeeps.
Prevents undue stress on related components and centers swaybar for proper disconnect operation.
Ultra-strong, DOM tube construction features OE bends for correct geometry and clearance.
Zinc plated and powder coated for excellent protection from corrosion and debris.
Robust threaded design
enables user to position axle
in 1/16" increments for
extremely precise control.

Installation Notes
Installation Difficulty:
Level 3Advanced

1. Requires 0 to 6.0 in. suspension lift.
2. For vehicles equipped with CV-type driveshaft order
Track Bar 16007 007 which includes the required
angle relocation bracket.
3. Not compatible with right hand drive vehicles.

Installation Time: 1-2 hours
Parts Included

Track Bar
Installation Hardware

  • Jeep Wrangler (TJ)

  • 2006 Jeep Wrangler (TJ)
  • 2005 Jeep Wrangler (TJ)
  • 2004 Jeep Wrangler (TJ)
  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
  • Jeep Wrangler Unlimited (TJ)

  • 2006 Jeep Wrangler Unlimited (TJ)
  • 2005 Jeep Wrangler Unlimited (TJ)
  • 2004 Jeep Wrangler Unlimited (TJ)
Share Your Thoughts
Review Summary
Shared Media
Questions