JKS Manufacturing JKSOGS161 Front Track Bar Brace for 07-18 Jeep Wrangler JK with 3+" Lift

To eliminate this threat, JKS Manufacturing has developed the Front Trackbar Brace. This ingenious product reinforces the factory bracket and ensures your track bar mount will never fail. It welds directly to the original bracket and axle housing at multiple points, providing an extremely strong and permanent solution. As a side benefit, the Front Trackbar Brace relocates the steering damper to a more effective position that improves clearance and protects the damper from impact off-road. A secondary mounting location for the track bar is also provided to accommodate high-clearance steering conversions.

When combined with the JKS Rear Trackbar Brace, Wrangler JK owners can take comfort in knowing that both track bar mounts are solid, safe and secure. Of course, these products should always be installed before damage occurs to the factory brackets. Waiting for failure to occur is far more difficult and expensive to repair, not to mention dangerous if you're miles from home.

Installation Notes

Installation Difficulty:

Level 4Experts Only

1. Installation requires welding.
2. Special bushing/bearing spacers for steering damper are required. Refer to Installation Instructions for details.

Installation Time: 2-3 hours

Installation
Instructions

Parts Included

Front Track Bar Brace