JKS Manufacturing JKSOGS162 Steering Stabilizer Relocation Bracket for 07-18 Jeep Wrangler JK
The last place you want to lose maneuverability is on the trail, where diagnosing and repairing the problem is often impossible. Nevertheless, this unfortunate occurrence affects Wrangler JK owners more often than you might expect. The problem involves the factory mounting location of the steering stabilizer, which is immediately forward and well below the centerline of the front axle. This leaves the steering stabilizer defenseless against impact damage, and therefore is a disaster waiting to happen.
The Jeep specialists at JKS Manufacturing have identified this hazard and developed a solution that optimizes steering stabilizer performance while keeping it out of harm's way. The Steering Stabilizer Relocation Bracket is a heavy-duty, high-clearance bracket that positions the stabilizer in a much safer location where limited ground clearance and contact with obstacles are no longer a concern for the driver.
The JKS Steering Stabilizer Relocation Bracket is constructed from premium 0.25" steel and precision cut, formed and folded to provide incredible strength and a perfect fit. A heavy-duty mounting stud for the stabilizer is robotically welded to the bracket with premium hardware supplied to ensure a safe, secure connection. The entire bracket is covered with a durable zinc plating that provides a highly attractive and ultra protective finish for extreme atmospheric conditions.
The relocation bracket offers two options for vehicle attachment. A bolt-on installation using the high-quality fasteners supplied is a perfect choice for JK owners that only seek a more effective stabilizer location. An optional weld-on installation fuses the bracket to strategic points on the axle housing which effectively reinforces the otherwise weak factory trackbar bracket. This serves as an excellent alternative to the larger JKS Front Trackbar Brace (PN OGS161) on vehicles without an inverted drag link.
- Shipping Weight: 2.3lb
- Shipping Dimensions: 11in x 7in x 4in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
JKS Manufacturing Steering Stabilizer Relocation Bracket Reviews
Quality construction. I used the bolt on method, not weld on
I purchased this brace to beef up my Trackbar mount on the axle, I already had the TeraFlex FALCOM 2.2 steering stabilizer that uses the stabilizers integral bolt as the Trackbar bolt, so I had to remove the 5/8" stud JKS had welded onto the brace.
It is working out OK, I'm using a 5/8" Bronze shim to make the 14mm factory size stabilizer integral bolt fit tight. I have yet to clean off all the rust, paint, grind, weld the brace on, and paint again. I wanted to make sure the TeraFlex Monster HD Adjustable t Trackbar would fit with both the JKS axle brace, and the JKS Frame brace I installed. All is well. The Monster Trackbar has a 9/16" ID bushing, so I had to use a 9/16" reamer on the upper frame mount holes. I just happened to have an old used and abused one laying around.
Questions
