Auburn Gear ECTED Locker for 27 Spline Dana 30 with 3.73 and Numerically Higher Gear Ratio

Variable Torque Transfer Capability – The ECTED's torque transfer is electronically controlled and is infinitely variable from essentially an open differential to that of 100% torque transfer. This allows the transfer of torque to be modulated to give the vehicle maximum traction without compromising vehicle stability. Automatic Engagement & Disengagement – The ECTED is "seamless" to the driver. When wheel slippage is sensed it instantly and automatically engages to the torque bias level required. Likewise, it automatically disengages immediately when torque transfer is not needed. Additionally, the, friction-based clutches of the ECTED allow for smooth and quiet engagement and disengagement unlike "positive clutch" style differentials which are abrupt and noisy. Programmable to Anticipate Wheel Slip – Since the clutch actuation is electronic, the ECTED does not have to rely on wheel slip to be activated as with viscous-type and hydraulic designs. When controlled by a system that monitors throttle position, the ECTED can be engaged when a rapid increase in throttle position is sensed, indicating a desire for maximum acceleration and traction. In this situation, the ECTED engages in anticipation of the need for maximum traction. ABS & C-lock Compatible – Because the ECTED is electronically controlled and is capable of instantaneous disengagement, it can be deactivated at any point in time so as to not interfere with ABS systems. It is also designed to accept C-lock designed axle shafts. Programmable to Meet Vehicle Performance Requirements – When connected to a vehicle's on-board control system and monitoring conditions such as wheel speeds, steering position, throttle position, yaw, etc., the ECTED can be controlled to meet a variety of vehicle performance requirements. Fits Into Most Existing Axle Housings – The ECTED has been developed in several sizes and has been designed to fit within many current OEM axles without modification except for a wire entrance hole.