Home » Jeep Lift Kits & Suspension » Lift Kits » Spring Lift Kits » MOPAR Performance 2" Lift Kit with Bilstein Shocks for 07-11 Jeep® Wrangler Unlimited JK 4 Door

Mopar® Performance 2" Lift Kit with Bilstein Shocks for 07-11 Jeep® Wrangler Unlimited JK 4 Door

The Quadratec® Difference
Catalog #: 16170.1001
Mopar® Part #: P5155207
Most moderate JK lifts use coil spring spacers with the factory coil springs. With this method you get lift, but suspension extension travel (controlled by shock length) must be limited or the coil springs and spacers will unseat. Mopar’s replacement coil spring lift allows as much suspension articulation as most 4” Lift Kits, resulting in amazing performance with minimal impact on vehicle center-of-gravity.

Check out the optional AEV ProCAL Module, a great finishing touch to any lift kit as it can reprogram your vehicles computer compensating for gear ratio and tire size changes after lift kit installation not to mention many other additional features.
  • Lift Kits work with all Wrangler vehicle systems

including the Electronic Stability Program

  • Ideally rated coil springs, combined with specially tuned Bilstein high-pressure monotube shock absorbers, provide unmatched ride

quality and handling, both on-road and on the trails

  • Yields all of the suspension articulation the JK platform has to offer
  • Adjustable alignment cams (at lower link arms-to-axle attachment points) correct caster angle
  • Front body / frame alignment corrected by an adjustable track

bar; the rear is handled via a track bar relocation bracket with integrated brace

  • Correct length sway bar links with greasable, factory type ends
  • Brake hose and parking brake cable relocation brackets
  • Replacement high-clearance, high capacity steering dampener kit

Wheel and Tire Recommendations:
Stock tires and / or wheels can be used. Ideal
aftermarket wheel specifications are 17” Diameter x 9” Wide with 4.5” Back Spacing.
Tire diameter: 33” to 35”
Tire Width: No greater than 12.5” when used on stock wheels, or aftermarket wheels with stock Back Spacing (6.0”). Check wheel size recommendations of tire manufacturer. 13.5” width tires can be run with a 4.5” Back Space wheel, but some fender scrub may be experienced during full articulation.
Wheel Diameter: No less than 17”
Wheel Width: 7.5” (stock Rubicon) to 9”.
Wheel Back Spacing: 6” (stock) to 4.5” (preferred). As Back Spacing dimension decreases, track width and stability increases.

Installation Notes
Installation Difficulty:
Level 3Advanced

1. Rubicon Models require Front Sway Bar Links.

Parts Included

Coil Springs
Front Track Bar
Brake Line Brackets
Cam Bolts
Rear Track Bar Bracket
Steering Stabilizer
Sway Bar Links
Bump Stops

  • Lift Height (Lift Kits): 2, 2.00
  • Shocks Included: With Shocks
  • Max Tire Size: 35
  • Lift Height Range: 0 - 2.5 inch
  • Included Parts: Brake Line Extensions, Bump Stop Extensions, Cam Bolts, Front Track Bar, Rear Track Bar Bracket, Steering Stabilizer, Sway Bar Endlinks
  • Jeep Wrangler Unlimited 4-Door (JK)

  • 2011 Jeep Wrangler Unlimited 4-Door (JK)
  • 2010 Jeep Wrangler Unlimited 4-Door (JK)
  • 2009 Jeep Wrangler Unlimited 4-Door (JK)
  • 2008 Jeep Wrangler Unlimited 4-Door (JK)
  • 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
Review Summary
Shared Media