Mopar P5155404AB Performance 4" Lift Kit with Bilstein Shocks for 07-11 Jeep Wrangler Unlimited JK 4 Door

• Ideally rated coil springs, combined with specially tuned Bilstein high-pressure monotube shock absorbers.
• Adjustable alignment cams (at lower link arms-to-axle attachment points) correct caster angle.
• Front body / frame alignment corrected by an adjustable track bar; the rear is handled via a track bar relocation bracket with integrated brace.
• Correct length stabilizer bar links with Heim ends.
• Brake hose and parking brake cable relocation brackets.
• Replacement high-clearance, high capacity steering stabilizer kit.
• Works with all vehicle systems including the Electronic Stability Program.

Wheel and Tire Recommendations
NOTE: The use of 35” or larger diameter tires may require modification to Mopar rock rails, and certain model Mopar bumpers, for adequate clearance.
Tire Diameter: 33” to 37”
Tire Width: No greater than 13.5”
NOTE: Tires wider than 10.5” may require wheels with dimensions as follows:
Wheel Diameter: No less than 17”
Wheel Width: 8”- 9”
Wheel Back Spacing: 3.25” to 4.75”.
As backspacing dimension decreases, track width and stability increases.

Installation Notes

Installation Difficulty:

Level 3Advanced

Installation Time: 4-6 hours

Parts Included

Front Coil Springs
Rear Coil Springs
Cam Bolts
Front Bump Stops
Rear Bump Stops
Front Track Bar
Rear Track Bar Bracket
Rear Sway Bar Links
Brake Line Brackets
Steering Stabilizer Kit
Bilstein Shocks