AEV / Nth Degree 4.5" Long Arm Suspension without Shocks
For 04-06 Jeep® Wrangler TJ Unlimited with Manual Transmission
Quadratec Part No: 16502.3002.T Manufacturer Part No: NTH01542AA $3999.99 This item has an additional $200.01 shipping surcharge.
American Expedition Vehicles is proud to announce the re-release of the popular Nth Degree Long-Arm suspension system for the Jeep® TJ. Designed by former Jeep® suspension engineer, Jim Frens, the Nth Degree Long-Arm system has established its remarkable reputation by pushing the TJ’s trail capability and highway drivability well beyond after market standards. Time-proven OE engineering theory has been applied throughout the Nth Degree system to solve the classic handling and ride quality problems associated with lifted, short-wheelbase vehicles.
Arms Shown in Gray for Illustration Purposes Only, Arms & Components Ship in Black Powder Coat, Only Coil Springs Ship in Gray.
Further, innovative components such as Nth Degree’s, Dogleg control-arms and Stinger are combined to dramatically improve ground clearance and wheel travel while eliminating traction-robbing axle-wrap. When installed on the Jeep® TJ, the end result is a superbly balanced vehicle that impresses on both class 5 rock trails and 5-lane interstates.
Tummy Tucker: 1/4” thick Skid/Belly Pan / 2.5-inch ground clearance gain over stock.
Slider: Rear axle skid guard to protect the lower u-joint and differential housing. Front Dog-Leg Control Arms: Dramatically improve ground clearance. Rear Dog-Leg Control Arms: Dramatically improve ground clearance. Gyro Joints: Control arm joints offer bind-free articulations and great ride. Stinger Boom: Torque arm eliminates axle wrap and improves articulation. Rear Track Bar Tower-Brace: Restores proper roll-center geometry. Rear Spring Relocators: Correct for poor spring seat geometry. Rear Shock Shifters: Optimize shock travel and ground clearance. Bump Stop Spacer: Protect shocks from bottoming out. Drop Pitman Arm: 3-3/4" Drop. Brake Lines: Front 21" long Brake Lines: Rear 24" long
GyroJoint™ Features & Benefits:
The GyroJoint™ is a ball-in-socket design that permits zero-bind flexibility and road/trail-taming isolation in the same control arm…an industry first and still exclusive to Nth° longarms. It combines the flexibility and durability of a rod-end style joint with the cushioning ‘give’ normally lost when the stock bushings are replaced with rod-ends or ball-and-race designs. Every GJ-equipped arm is also on-car adjustable for length and the isolator material is separately tuned for front or rear applications. It’s also fully grease-able – yet doesn’t ingest dirt and mud while on the trail – so it will last as long as your Jeep with just occasional maintenance, but it’s also rebuild-able without special tools should the need ever arise.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either.
