Skip to main content
Home » Jeep Engine & Fuel System » Engine Tuning » Performance Chips » AEV ProCal Module
AEV ProCal Module is no longer available
Here are some similar items you might be interested in

AEV ProCal Module for 07-14 Jeep Wrangler JK

Description
AEV's ProCal Module is a hand-held powerhouse! This essential tool provides JK owners an easy, low-cost way to make a variety of useful changes not offered by the dealer or any other re-programmer. Topping the list is the ability to correct the speedometer and gear ratio when larger tires are installed. With the speedometer left uncorrected, there is a major degradation in the performance of the stability control (ESP), transmission shifting, and engine performance. The best part of the ProCal is that it isn't just for correcting the speedometer. The Tire Pressure Monitoring System can now be recalibrated to better suit aftermarket tires without triggering the dash light. Further, the ProCal Module makes it possible to activate daytime running lamps, "one-touch" turn signals, enable a temporarily increased engine idle speed for winching, clear engine codes, and even has a feature to help align the vehicle perfectly for optimal ESP performance.
Details
Users will also love the ProCal Module for the other options it provides. Their vehicle's factory Tire Pressure Monitoring System can now be recalibrated to allow for lower street pressures without triggering the annoying dash light. Further, the ProCal Module makes it possible to activate daytime running lamps, one-touch turn signal options and temporarily increase engine idle speed for winching.

The ProCal Module is equipped with a series of easy-to-use dip switches. By reading the simple code card included with the Module, any user can quickly dial in a code for the desired recalibration. From there they simply plug the Module into their vehicle's OBD port and wait for the horn to honk. The whole process can be completed in mere minutes and it's just as easy to reverse.

Module Functions:

  • Large tire recalibration (Restores the vehicle's speedometer/odometer accuracy following the installation of larger-than-stock tires)
  • Axle gear ratio recalibration (Resets automatic transmission shift points to maximize the benefits of an axle gear ratio change)
  • Tire Pressure Monitoring System recalibration
  • Daytime running lamp activation/deactivation, and lamp location selection
  • One-touch turn signal activation/deactivation
  • Engine idle speed options (Improves winch performance and battery charging capabilities by temporarily increasing engine idle RPM)
  • Steering wheel centering (Provides for spot-on steering alignment)
  • Clears Engine Diagnostic Codes

Construction:

  • ROHS Compliant (Meets European Restriction-of-Hazardous-Substance standards)
  • Lead and Mercury Free
  • Meets or exceeds Bosch CAN 2.0b specifications
  • 100% Designed by AEV
  • Made in the USA

Application:

  • Compatible with 2007 and newer Jeep Wranglers equipped with 3.6/3.8L V6, 5.7L or 6.1/6.4L V8, 2 or 4-doors and right or left-hand-drive.
  • Once used for recalibration, AEV's ProCal Module stores a vehicle's VIN in its memory. While a VIN is stored in memory, a ProCal Module cannot be used on a second vehicle. To use the ProCal Module on a second vehicle, the first vehicle must be recalibrated to stock. This will clear the first VIN and ready the ProCal Module for use on the second vehicle.

Please note:

  • The AEV ProCal will enable axle gear ratio changes to be made to Wranglers equipped with the A580 Automatic transmission (2011+ 2.8L, 2012+ 3.6L)
  • The AEV ProCal cannot change axle gear ratios for 2011+ 2.8L CRD diesel Wranglers with manual transmissions.
  • AEV's ProCal Module now features an all-new Transfer Case Calibration function that allows customers to install a non-stock transfer case into their 2012+ JK Wrangler (w/ A580 trans) without causing the vehicle to go into limp mode. This includes 2-speed Atlas transfer cases as well as Chrysler's Command-Trac NV241 (Sport/Sahara) and Rock-Trac NV241 (Rubicon) transfer cases.This new feature is only found on the latest version of the ProCal Module (part number 30406007AG). As of 2/18, all ProCal Modules being shipped from AEV are the latest version and include this function.

Key Features:

  • Correct speedometer
  • "One touch" turn signals
  • Clear engine codes
  • Easy to use DIP switches
  • Recalibrate tire pressure monitor
  • Increase engine idle speed
  • Optimize ESP performance
  • Transfer Case calibration (2012+ JK Wrangler w/ A580 trans)


Installation Notes
Installation Difficulty:
Skill Level 1 IconLevel 1Beginner
Installation Time: Less than an hour
Parts Included

ProCal Module
Quick Reference Guide
Installation Instructions

  • Jeep Wrangler 2-Door (JK)

  • 2014 Jeep Wrangler 2-Door (JK)
  • 2013 Jeep Wrangler 2-Door (JK)
  • 2012 Jeep Wrangler 2-Door (JK)
  • 2011 Jeep Wrangler 2-Door (JK)
  • 2010 Jeep Wrangler 2-Door (JK)
  • 2009 Jeep Wrangler 2-Door (JK)
  • 2008 Jeep Wrangler 2-Door (JK)
  • 2007 Jeep Wrangler 2-Door (JK)
  • Jeep Wrangler Unlimited 4-Door (JK)

  • 2014 Jeep Wrangler Unlimited 4-Door (JK)
  • 2013 Jeep Wrangler Unlimited 4-Door (JK)
  • 2012 Jeep Wrangler Unlimited 4-Door (JK)
  • 2011 Jeep Wrangler Unlimited 4-Door (JK)
  • 2010 Jeep Wrangler Unlimited 4-Door (JK)
  • 2009 Jeep Wrangler Unlimited 4-Door (JK)
  • 2008 Jeep Wrangler Unlimited 4-Door (JK)
  • 2007 Jeep Wrangler Unlimited 4-Door (JK)

AEV ProCal Module Options

Part NumberCatalog #OptionPrice