Noram Auto Body Parts 15477 Replacement Steel Rear Floor for 76-95 Jeep CJ-7 & Wrangler YJ

good fit

where the metal is pressed bent it had warped it had to do some releaf cuts to help it lay flat also order the floor braces when you get this

The metal is approx. 2 gauges thinner (22 gauge) than the original metal (20 gauge). It is no where close to being an exact replica and is missing almost all of the embossments, holes, and ridges to make solid. It is heavily warped as the 5 ridges in the pan were rolled in, rather than stamped. It should have 6 lengthwise ridges, and 1 widthwise rige (missing). No holes for any mounts exist. Embossed mounting points for bolts are also missing. You must get the under side support braces, but expect to trim them to fit. I am very concerned about the thinness of this metal, and am considering layering sheetmetal to this to make it thicker or possibly adding additional braces. You need to be a highly skilled fabricator / bodyman to perform an full replacement of this pan. Unfortunately, this is the only source for such a product.