Rugged Ridge 13400.04 Premium Low-Back Bucket Seat Tan for 76-02 Jeep CJ & Wrangler YJ, TJ
Premium Bucket Seat fits driver or passenger side, whichever you prefer!
Level 2IntermediateBolt directly to factory slider mount holes.
(Some drilling required without seat slider)
*97-02 Jeep Wrangler TJ require seat adapter brackets
- 1 Bucket Seat
- Assembly Hardware**Original seat bolts must be reused for installation.
- Features: Fixed Back
- Color: Tan
- Material: Vinyl
- Location: Front
- Shipping Weight: 25lb
- Shipping Dimensions: 25in x 25in x 21in (L x W x H)
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
- 1976 Jeep CJ-5
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rugged Ridge Premium Low-Back Bucket Seat Tan Reviews
Giving "4.5" stars instead of 5 because **threads to not match factory**. Instructions say to re-use factory bolts, which are standard 5/16", but this seat's thread is metric M8. Otherwise a very nice seat, well-manufactured, and excellent color/texture fabric match. But needed extra trip to hardware store due to misleading instruction :/
Well built, good bang for the buck, but not very comfortable. If I could juuust get it to "recline" like... just an inch, it would be SO much better. As is, the seat back is nearly vertical / 90 degrees, and the top of the seatback digs right into my mid-upper back. Like I said - if it could just recline (or BEND) back even a little bit, it'd be 1000% better.
I needed replacement seats for my ‘97 TJ. My old seats were totally roached and somehow these are worse. They added about 3 inches up to my seat position. So now I can’t see any red lights I’m at or street signs. Also somehow sliding the seats back and forth is harder than ever. I knew they wouldn’t recline when I got them but hoped they would be leaned back enough that they were comfortable. The back of the seat is basically straight up and down. Just rode for a few hours yesterday and was super uncomfortable.
If I had the chance to do it again I’d keep my old beat up seats. This was a waste of money. Wish there was a better low back seat option out there
