Home » Jeep Engine & Fuel System » Cooling System » Radiator Hoses » Samco Sport XDB Silicone Coolant Hoses for 87-95 Jeep® Wrangler YJ with 2.5L Engine

Samco Sport XDB Silicone Coolant Hoses for 87-95 Jeep® Wrangler YJ with 2.5L Engine

Catalog #: 51207.5007
Samco Sport Part #: TCS-460/C
For over 15 years Samco have led the world in performance silicone hoses, supplying leading OEMs, Formula 1, World Rally and SuperBike teams. Samco hoses are made by hand in the UK by skilled craftsmen using only the finest European Automotive Silicone. Silicone does not age or perish like black rubber, and it offers far superior temperature and pressure resistance. Now, with Samco®XDB™ - their Xtreme Duty Build - Samco have produced their most rugged hose yet - specifically engineered for Jeep vehicles.

Samco's silicone Jeep coolant hoses are hand-made in the UK using multiple layers of silicone rubber reinforced with specialist fabrics rated to over 350oF. Depending on the application, Samco use either 3 or 4 plies, using a reinforcing wire helix where necessary to prevent hose collapse under vacuum conditions. All hoses are then 100% quality inspected in the UK. The resulting hoses offer a lifetime of reliable performance, guaranteed not to perish or crack like standard black rubber hoses.
Additional Nomex XDB™ PLY
With their Xtreme Duty Build (XDB™) technology, Samco add an extra 4th or 5th Nomex® high temperature ply. This gives maximum protection from radiant heat sources under the hood, protecting the core hose from heat ageing effects - vital when engine ventilation is reduced such as when the vehicle is used in low speed off-road & trail work.
This ply also increases the hose's burst pressure by over 30%* - specifically in the weakest areas of a hose – at mid-span.
Tuff-Cuff™ hose ends
Hose clamping is often misunderstood - thick hoses are great for handling pressure, but the more soft material that is present under a clip, the less clamping force is achieved on the pipe (and over time, clamp torque is lost as the material 'relaxes' or 'sets' under the stress).
With XDB™, the final Nomex® ply is intentionally removed for an 18mm section at each end of the hose. By removing this material from under the clip, the 'setting' effects are dramatically reduced, and maximum clamp pressure transmission is achieved – up to 40%* improvement compared to black rubber hose. (Removing this section does not weaken the hose in any way - even after this section is removed, this area is still stronger than the mid-section because it is protected from radial expansion due to the proximity of the hose clip.)
The final feature of XDB™ is the prominent 'end shoulder' - this block of material prevents the hose 'sub-marining' underneath the clip as the hose takes on pressure. The combined effect of these technologies is a hose which offers the burst performance of a 4 ply silicone hose (up to 100%* higher than black rubber) but with a 40%* higher 'blow-off' force.
*Tests conducted at room temperature at Silflex Ltd 2009 - actual results may vary on application. Working pressures are lower than burst pressures - see website www.samcoxdb.com for details.

Installation Notes
Installation Difficulty:
Level 2Intermediate
Installation Time: 1-2 hours
Parts Included

1 Top Radiator Hose
1 Bottom Radiator Hose
4 Marine Grade Stainless Steel Clamps

  • Engine Size: 2.5L I-4
  • Engine Fuel: Gasoline
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
Share Your Thoughts
Review Summary
Shared Media