Crown Automotive 231MASKIT NP231 Master Rebuild Kit for 87-06 Jeep Wrangler YJ & TJ and 87-01 Cherokee XJ
Quadratec Part #:
52270-104
Crown Automotive Part #:
231MASKIT
Description
If you are into off-road adventures with your Jeep or you drive in poor conditions with your 4-wheel drive engaged, then you want to keep your transfer case serviced. The Crown Automotive NP231 Master Rebuild Kit has all of the components that tend to wear out with continual use, such as bearing, seals and shift pads. Major components like input and output shafts and gears are available as well, but you will find that this kit has everything you need for preventative maintenance to make sure you have a proper functioning 4-wheel drive unit when you need it.
Details
Replaces Wearable Parts: The components that see the most wear when the 4WD is engaged are replaced fresh for solid performance
Dependable Quality: You can trust that when the transfer case is installed and run, that you will not need to drop it for service again until you are ready.
- Transfer Case Model: NP231
- Shipping Weight: 5lb
- Shipping Dimensions: 10in x 10in x 4in (L x W x H)
Jeep Cherokee (XJ)
- 2001 Jeep Cherokee (XJ)
- 2000 Jeep Cherokee (XJ)
- 1999 Jeep Cherokee (XJ)
- 1998 Jeep Cherokee (XJ)
- 1997 Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
- 1995 Jeep Cherokee (XJ)
- 1994 Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
Jeep Comanche (MJ)
- 1992 Jeep Comanche (MJ)
- 1991 Jeep Comanche (MJ)
- 1990 Jeep Comanche (MJ)
- 1989 Jeep Comanche (MJ)
- 1988 Jeep Comanche (MJ)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive NP231 Master Rebuild Kit Reviews
Mark S.
10/3/2020
This kit comes with everything you need to get the job done of rebuilding your transferase.
John C.
2/6/2018
Perfect fit for 90 YJ.
Questions
Sergio A.
will this kit fit my 1995 Grand Cherokee Laredo 4.0 VIN 1J4GZ58S5SC7364466 AUTOMATIC TRANSMISSION 4X4? MY TRANSFER CASE is 231 J
No, this will not fit the ZJ transfer case.
Seth C.
Do these kits contain the wide input bearing (BD50-8) found in early versions or the narrow (6010-N) found in later versions? How do I ensure I receive the wide version that I require?
This kit covers the entire run of the NP231, this kit includes both the BD50-8 as well as the 6010-N. Crown has you covered and ensures you have everything you need.
Aziz A.
i have a np231 transfer case on my 2002 tj will this fit on my tranfer case?
Yes this will fit all NP231 Transfer cases up to 2006 TJ Wranglers
