The manifold and oil removal filter come out of the box completely assembled, ready to install in the supplied bracket with the supplied hardware. Air lines are simply trim to fit and push into the push to connect air fittings.
Included in the kit is a pair of quick couplers and mounting brackets (not shown in current photo) that mounts the couplers each side under the dash, utilizing the door strap retaining bolts. This does work with most after market cage additions, like the Rockhard 4x4 parts cage.
A complete air supply harness is included, as well as a "York saver" LED compressor warning light. This light will turn green when the compressor turns on and turn off when it turns off. If the light comes on for more than 15 seconds (typically due to a line or other component failure) then the light will turn red, warning you to shut down the compressor or you may cause serious compressor damage. There is no separate switch in this circuit, the compressor will turn on whenever the pressure is low enough to turn it on when the engine is running.
NOTE: The JK air supply that comes with the ORO JK AIROCK kit does have more components than this kit, this is NOT the full kit offered with the AiROCK kit.
York Compressor
Required Brackets
Installation Hardware
Hoses and Fittings
Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)