Home » Jeep Winches, Recovery & Safety Gear » Winches » WARN M8000 Self-Recovery Winch (12V DC) 100' Wire Rope and Roller Fairlead

WARN M8000 Self-Recovery Winch (12V DC) 100' Wire Rope and Roller Fairlead

The Quadratec® Difference
Catalog #: 92104.01.07
WARN Part #: 26502
Compact. Tough. An outstanding value for trucks, sport utility vehicles and Jeeps. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Available with 100' of wire rope and roller fairlead. Pulls a fast 8 ft. per minute at rated load.

Wireless Remote Control System can be added which is also available separately.
Part Number: PN 26502 CE (12V DC) 100' wire rope and roller fairlead
Rated Line Pull: 8000 lbs. (3630 kgs.) single-line
Motor: 12V 4.8 hp, Series Wound™
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 216:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 74 lbs. (34 kgs.)
Wire Rope: 100', 5/16" diam. (30m, 8mm diam.)
Fairlead for PN 26502: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Argent Gray Powder Coat
Nuts/Bolts: PN 39625

Line Pull
Line Speed
Pull by layer
0 42(12.8) 80 amps 1/8000(3629)
2000(910) 16(4.88) 200 amps 2/7280(3302)
4000(1810) 11.9(3.63) 285 amps 3/6670(3026)
6000(2720) 9.79(2.98) 350 amps 4/6230(2826)
8000(3630) 8.01(2.44) 435 amps

Above performance specs are based on first layer of drum

Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H.
(534mm L. x 160m D. x 193mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
Installation Notes
Installation Difficulty:
Level 2Intermediate

Warn winch mount required for installation.
Warn Solenoid Bracket sold separately.

Parts Included

100', 5/16" diam. (30m, 8mm diam.) Wire Rope
12V 4.8 hp Series Wound Motor
Remote switch, 12' (3.7m) lead
Spring- loaded control switches
Automatic Direct Drive Cone Brake
3-Stage Planetary with a 216:1 ratio
Sliding Ring Gear Clutch for freespooling
Contactor Control Box
Color-coded 2 gauge, 72" cables and connectors.

  • Line Length: 100 ft
  • Line Pull: 8,000 lbs
  • Max Line Speed: 42 ft/min
  • Current Draw: 435 amps
  • Remote: Wired
  • Intended Usage: Occasional
  • Solenoid: Remote
  • Line Type: Steel Cable
Share Your Thoughts
Review Summary
Shared Media