Home » Jeep Winches, Recovery & Safety Gear » Winches » Quadratec® 92122 2021 Q11500i Self Recovery Winch

Quadratec® 92122 2021 Q11500i Self Recovery Winch

Catalog #: 92122.2021
Engineered specifically for Jeep® Wrangler, our NEW integrated solenoid winches deliver increased line pull ratings for extra pulling capacity with the same great features as our Standard Q-Series winches. All Quadratec Winches are manufactured in our state of the art ISO 9001 factory and are CE certified for our international customers. Take advantage of Quadratec's massive purchasing power and get the lowest priced winch in its class. The fixed solenoid design provides a sleek finished look and simplified installation with less wiring. The die cast finned aluminum solenoid housing dissipates heat under heavy winch loads while providing rugged durability. The flagship Q11500i model delivers maximum recovery power for heavier vehicles like the 4 door Wrangler Unlimited. The powerful 4.8 HP series wound motor and class leading low gear ratios provide fast line speeds while the battery friendly low current draw gives you the generous winching time from your battery charge. You also get an industry best Limited Lifetime Warranty on mechanical parts and a 1 year Warranty on all electrical components. Includes detailed installation instructions and a handy glove box Winch Operators Guide. Measures 22.25" long x 6.25 wide x 8" high.
Mile Marker Superwinch T-Max
Model Q11500i SI 12000 Talon 12.5i EWI-12000
Capacity 11500 lbs 12000 lbs 12500 lbs 12000 lbs
Warranty LL/1Y LL/1Y LL/3Y 3Y/1Y
Gear Reduction to 1*** 295 296 148 265
Cable Diameter .375 .375 .375 .328
Cable Length 100' 100' 85' 100'
Line Speed fpm @ 10000#** 6.5 4.5 3.25 6.8
Motor Draw @ 10000#** 300 Amps 370 Amps 530 Amps 320 Amps
Price $459.99 $656.99 $924.99 $708.57
Best in Class Score 4 3 3 1
**First Layer of Cable
LL= Limited Lifetime         Y= Year
*** Gear Reduction to 1, otherwise known as the "Gear Ratio". A higher numerically gear ratio will provide slower and more powerful pulling while also providing the least amount of amp draw on your battery because the winch motor doesn't need to try as hard. A lower numerically gear ratio will pull faster but also put more amp draw on your battery.

Features Included:
1 Class Leading Line Pull Ratings for Extra Pulling Capacity
2 Heavy Cast Aluminum - Heat Dissipating Solenoid Housing
3 Pre-Assembled and Pre-Wired with Simplified Installation
4 Superior Off Road Durability with Rugged Sleek Looks
5 Hefty Clutch Control
6 Case Hardened Input Gears
7 Case Hardened Intermediate Gears
8 Case Hardened Output Gears
9 Stainless Steel Hardware Throughout
10 Case Hardened Hex Drive Shaft
11 Load Holding Brake System
12 Winch Drum is Case Hardened
13 High Strength Aluminum Tie Bars
14 Shaft Coupler is Case Hardened
15 Solid Copper and Brass Power Terminals
16 Durable Powder Coat Finish
17 Powerful 4.8 Horsepower Series Wound Motor
18 Heavy Duty Integrated Solenoid
19 Galvanized Aircraft Cable 100' x 3/8"
20 Stainless Steel Safety Latch
21 Forged Steel Clevis Hook
22 Nylon Safety Hook Strap
23 High Visibility Rubberized Winch Remote with 12' Cord
24 Solid Copper Battery Cables
25 Zinc Plated Roller Fairlead

Installation Notes
Installation Difficulty:
Level 2Intermediate

Ground cable may require installaion.

Installation Time: Less than an hour
Parts Included

Q11500i Winch
Zinc Plated Roller Fairlead
100' x 3/8" Aircraft Cable
Forged Steel Clevis Hook
Nylon Safety Hook Strap
12' Wire Remote Control
Installation Hardware

Limited Lifetime Warranty on Mechanical Parts.
1 Year Limited Warranty on Electrical Components.
  • Line Length: 100 ft
  • Line Pull: 11,500 lbs
  • Max Line Speed: 14 ft/min
  • Current Draw: 300 amps
  • Remote: Wired
  • Intended Usage: Occasional
  • Solenoid: Integrated
  • Line Type: Steel Cable
Share Your Thoughts
Review Summary
Shared Media