FREE License Plate Bracket with Q-Series Winch.
Quadratec's legendary Q-Series Winches are now available with Dyneema® winch line; an ultra high molecular weight polyethylene fiber developed in the Netherlands over 20 years ago. Synthetic winch lines are a real game changer in off road recovery. Despite being softer and flexible, Dyneema® is stronger and more durable than winch steel cables. In fact, when properly cared for, Dyneema® winch lines will outlast steel winch cables. Weight for weight, Dyneema® is 15 times stronger than steel and its light weight significantly improves the ease of handling. It even floats and is an obvious benefit when winching in water conditions. Dyneema® will not rust, kink and lose strength like steel cables. Handling steel cables can sometimes result in wire splinters but synthetic winch lines are much safer and easier to use. In the unlikely event of a synthetic winch line break, there is virtually no recoil, unlike steel wire where recoil is extremely dangerous. The ease of handling, increased safety and improved longevity of Dyneema® are why so many off road enthusiasts are making the switch. Each Synthetic Series Winch features 90' of Synthetic winch line with a 12' ballistic nylon chafe guard to protect your winch line from abrasions. Each winch line is 3/8" diameter and rated for 18,000 lbs. Other features include a billet aluminum hawse fairlead, deluxe winch hook and Winch Operator's Guide which includes helpful information on winching and the care and use of synthetic line.
Here are some similar items you might be interested in
Description
Details
|
LL= Limited Lifetime Y= Year
*** Gear Reduction to 1, otherwise known as the "Gear Ratio". A higher numerically gear ratio will provide slower and more powerful pulling while also providing the least amount of amp draw on your battery because the winch motor doesn't need to try as hard. A lower numerically gear ratio will pull faster but also put more amp draw on your battery.
Features Included:
1 Hefty Clutch Control
2 Case Hardened Input Gears To HRC 30-38*
3 Case Hardened Intermediate Gears To HRC 43-48*
4 Case Hardened Output Gears To HRC 43-48*
5 Stainless Steel Hardware Throughout
6 Case Hardened Hex Drive Shaft To HRC 38-42*
7 Load Holding Brake System
8 Winch Drum is Case Hardened To HRC 55-58*
9 High Strength Aluminum Tie Bars
10 Shaft Coupler is Case Hardened To HRC 30-38*
11 Solid Copper and Brass Power Terminals
12 Durable Powder Coat Finish
13 Powerful 4.8 Horsepower Series Wound Motor
14 Heavy Duty Solenoid with 2 Bracket Locations
15 Dyneema® Synthetic Rope 90' x 3/8"
16 Stainless Steel Safety Latch
17 Forged Steel Clevis Hook
18 Nylon Safety Hook Strap
19 High Visibility Rubberized Winch Remote with 12' Cord
20 Solid Copper Battery Cables
21 Aluminum Hawse Fairlead
* Rockwell Hardness.
Installation Notes
Installation Difficulty:
Level 2IntermediateInstallation Time: 1-2 hours
Parts Included
Q11000s Winch
Zinc Plated Hawse Fairlead
90' x 3/8" Dyneema® Synthetic Rope
Forged Steel Clevis Hook
Nylon Safety Hook Strap
12' Wire Remote Control
Remote Solenoid Box
Motor Mounted Solenoid Box Mount
Center Mounted Solenoid Box Mounts
Installation Hardware
License Plate Bracket
Warranty
Limited Lifetime Warranty on Mechanical Parts.1 Year Limited Warranty on Electrical Components.