Home » Jeep Winches, Recovery & Safety Gear » Winches » Quadratec Q11500is Self Recovery Winch for Dyneema® Synthetic Rope & License Plate Bracket
Quadratec® Q11500is Self Recovery Winch is no longer available

Quadratec® Q11500is Self Recovery Winch for Dyneema® Synthetic Rope & License Plate Bracket


Quadrapacs - Save big with our exclusive package deals!FREE License Plate Bracket with Q-Series Winch.
Quadratec's legendary Q-Series Winches are now available with Dyneema® winch line; an ultra high molecular weight polyethylene fiber developed in the Netherlands over 20 years ago. Synthetic winch lines are a real game changer in off road recovery. Despite being softer and flexible, Dyneema® is stronger and more durable than winch steel cables. In fact, when properly cared for, Dyneema® winch lines will outlast steel winch cables. Weight for weight, Dyneema® is 15 times stronger than steel and its light weight significantly improves the ease of handling. It even floats and is an obvious benefit when winching in water conditions. Dyneema® will not rust, kink and lose strength like steel cables. Handling steel cables can sometimes result in wire splinters but synthetic winch lines are much safer and easier to use. In the unlikely event of a synthetic winch line break, there is virtually no recoil, unlike steel wire where recoil is extremely dangerous. The ease of handling, increased safety and improved longevity of Dyneema® are why so many off road enthusiasts are making the switch. Each Synthetic Series Winch features 90' of Synthetic winch line with a 12' ballistic nylon chafe guard to protect your winch line from abrasions. Each winch line is 3/8" diameter and rated for 18,000 lbs. Other features include a billet aluminum hawse fairlead, deluxe winch hook and Winch Operator's Guide which includes helpful information on winching and the care and use of synthetic line.

Mile Marker Superwinch WARN
Model Q11500is SI 12000 Talon 12.5i SR ZEON 12
Capacity 11500 lbs 12000 lbs 12500 lbs 12000 lbs
Warranty LL/1Y LL/1Y LL/3Y LL/1Y
Gear Reduction to 1*** 295 296 148 216
Cable Diameter .375 .375 .375 .375
Synthetic Rope Yes NA Yes NA
Line Speed fpm @ 10000#** 6.5 4.5 3.25 4.5
Motor Draw @ 10000#** 300 Amps 370 Amps 530 Amps 375 Amps
Price $599.99 $656.99 $1039.99 $999.99
Best in Class Score 5 2 4 1
**First Layer of Cable
LL= Limited Lifetime         Y= Year
*** Gear Reduction to 1, otherwise known as the "Gear Ratio". A higher numerically gear ratio will provide slower and more powerful pulling while also providing the least amount of amp draw on your battery because the winch motor doesn't need to try as hard. A lower numerically gear ratio will pull faster but also put more amp draw on your battery.

Features Included:
1 Class Leading Line Pull Ratings for Extra Pulling Capacity
2 Heavy Cast Aluminum - Heat Dissipating Solenoid Housing
3 Pre-Assembled and Pre-Wired with Simplified Installation
4 Superior Off Road Durability with Rugged Sleek Looks
5 Hefty Clutch Control
6 Case Hardened Input Gears To HRC 30-38*
7 Case Hardened Intermediate Gears To HRC 43-48*
8 Case Hardened Output Gears To HRC 43-48*
9 Stainless Steel Hardware Throughout
10 Case Hardened Hex Drive Shaft To HRC 38-42*
11 Load Holding Brake System
12 Winch Drum is Case Hardened To HRC 55-58*
13 High Strength Aluminum Tie Bars
14 Shaft Coupler is Case Hardened To HRC 30-38*
15 Solid Copper and Brass Power Terminals
16 Durable Powder Coat Finish
17 Powerful 4.8 Horsepower Series Wound Motor
18 Heavy Duty Integrated Solenoid
19 Dyneema® Synthetic Rope 90' x 3/8"
20 Forged Steel Clevis Hook
21 Nylon Safety Hook Strap
22 High Visibility Rubberized Winch Remote with 12' Cord
23 Solid Copper Battery Cables
24 Aluminum Hawse Fairlead
* Rockwell Hardness.

Installation Notes
Installation Difficulty:
Level 2Intermediate
Installation Time: 1-2 hours
Parts Included

Q11500is Winch
Aluminum Hawse Fairlead
90' x 3/8" Dyneema® Synthetic Rope
Forged Steel Clevis Hook
Nylon Safety Hook Strap
12' Wire Remote Control
Installation Hardware
License Plate Bracket