Skip to main content
Home » Jeep Winches, Recovery & Safety Gear » Winch Accessories » Winch Hooks » Factor 55 Winch Line ProLink
Factor 55 Winch Line ProLink is no longer available
Here are some similar items you might be interested in

Factor 55 Winch Line ProLink

Description

Eliminate the winch hook and replace it with a safer and stronger D-ring shackle thimble from Factor 55. These thimbles, aka "ProLink", work with steel cable or synthetic winch rope and there is no splicing required making installation only a few minutes. Made from billet aluminum construction these come with a stainless steel shear pin. A optional rubber guard for fairlead and ProLink protection is available separately or you can choose the "Loaded" ProLink which comes with the guard and a Titanium shear pin. Fits standard 3/4" d-ring shackles.
Made in USA

Details

The advantages of winching with a screw pin shackle over a conventional winch hook are many:

  • D-ring shackles are up to 5X stronger than conventional winch hooks
  • Conventional hooks are too small to safely fit both ends of a recovery strap
  • Recovery straps cannot slip out of a shackle like they can with hooks
  • Hook safety latches are not rated for loads and can tear recovery straps
  • Conventional hook surfaces add higher stresses to recovery strap fibers, resulting in decreased strap ratings
  • Shackles can be quickly removed and stowed away until needed for winching.
  • Hooks do not cinch neatly against fairleads and are prone to rattling and loosening
  • Conventional winch hooks are designed for chains – not commonly used recovery straps
  • Engineered, Tested, and Made in USA
  • Stress analyzed using COSMOS FEA and destructively tested for confirmation
  • Billet construction — precision machined from 6061-T6 Kaiser Aluminum round bar
  • 16,000 pound max load rating
  • Fits all steel cables and synthetic ropes up to 3/8" in diameter
  • Fits eyes equipped with standard or tube thimbles to 3/8 inch diameters
  • 1.2 inch shackle tab thickness virtually eliminates "shackle rattle"
  • Massive 5/8 inch diameter carbon steel double shear pin - 6Al-4V Titanium upgradeable
  • Optional EPDM "Rubber Guard" protects alloy Hawse fairleads — rubber barb attachment
  • Can be installed and removed in minutes — simple snap ring removal
  • Cinches neatly against all types of fairleads — Hawse or Roller
  • Red and Black colors are powder coated to resist fading while all other colors are beautifully anodized and zinc plated in the USA

In every ProLink box a sheet is included on how to install the ProLink as well as some notes on anodized aluminum surfaces. Specifically, that anodized surfaces can and will fade and scratch (like bicycle parts) - which is normal wear and tear. This is just the nature of colored anodized aluminum parts. The parts are still protected from corrosion even when the color fades - they just don't look as new.

It turns out that the colors silver, black and gray are more resistant to sun fading than the red, blue and orange, especially in the sun belt states.

It seems that notifying the customer as they choose the ProLink color may be prudent to avoid any disappointments down the road. In other words, customers who plan to park their rig in the sun all day every day should probably choose silver, black or gray and not one of the colorful choices.

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate

1. Snap ring pliers are necessary.

Installation Time: Less than an hour
Parts Included

ProLink Assembly
Stainless Steel Pin
Circle Clip

Warranty
1 Year Limited Warranty.

Factor 55 Winch Line ProLink Options

Part NumberCatalog #OptionPrice