Home » Jeep Winches, Recovery & Safety Gear » D-Rings & Snatch Blocks » Snatch Blocks » ARB 10100020 Snatch Block 9000 - 38,500lb Breaking Strength

ARB 10100020 Snatch Block 9000 - 38,500lb Breaking Strength

Catalog #: 92144.3000
ARB Part #: 10100020
Description
An ARB snatch block is an incredibly useful piece of recovery equipment that greatly increases the versatility of either a vehicle mounted or portable winch. It enables you to retrieve loads that are double a winch's capacity by reducing the load on the winch by half. It also facilitates winching from varying angles when straight ahead isn't the best option.
Details
  • part number: 1010020
  • breaking strength: 38,500lb
  • side plate material: 6mm cold rolled steel
  • pulley material: specialized polymer
  • pulley diameter: 110mm
  • cable size: 1/4"-1/2"
  • greasable: not required

A snatch block should be one of the most carefully assessed pieces of equipment you buy. A poorly designed block can have a detrimental effect on a winch's cable, and lead to a failure of the wire rope or the snatch block itself.

ARB snatch blocks feature side plates that sit snug against the pulley, eliminating the possibility of the winch cable becoming trapped between the pulley and the side plates. The groove on the pulley itself tapers down to the center allowing for a variety of cable sizes (1/4"-1/2") to be used and ensures the cable is seated securely in the pulley, minimizing lateral movement. To ensure smooth pulley operation, the hardened steel pin is fitted with a nipple, to which grease can be periodically applied.

The ARB snatch block is a formidable piece of recovery equipment that should be included in every recovery kit.

Parts Included

Snatch Block

Share Your Thoughts
Review Summary
Shared Media
Questions