Change a CJ or Scout’s 2.6:1 stock ratio to a true, 4.0:1 low-range ratio. This TeraLOW low-range gear replacement kit benefits from the Dana 300’s strength and durability... more
The Tera Low231conversion kit is the
solution for providing Wranglers, Cherokees,
and Comanches with low crawl ratios. This kit
provides rock-crawling performance without
affecting high range gears for daily drivers,
or the trip to and from the back country.
It provides a true 4.0:1 reduction through a heavy duty 5 gear planetary system... more
This TeraLOW kit uses a six-spline input gear for Dana 20s with MANUAL transmissions. The kit converts the stock 2.03:1 to 3.15:1 for improved rock crawling performance... more
The Tera Low231 conversion kit is the
solution for providing Wranglers, Cherokees,
and Comanches with low crawl ratios. This kit
provides rock-crawling performance without
affecting high range gears for daily drivers,
or the trip to and from the back country.
It provides a true 4.0:1 reduction through a heavy duty 5 gear planetary system... more
This TeraLOW kit reduces the 2.43:1 stock low-range ratio to 3.15:1. This kit works on '66-71 CJs, utility wagons and pickups. CJs older than 1966 require a large Dana 18 or 20 transfer case housing from a '66-79 Jeep®.
The Extreme Short Shaft kit is what short wheelbase Wrangler owners have been
dreaming of for decades. The Extreme kit not only improves on strength, but also
increases driveshaft lengths by up to 7” over a stock application... more
The 2Low shift kit is designed similar to our popular 2Low for the 231 transfer case. This shifter will allow the 241OR case to have one more low range position for true 2WD Low Range to allow for tighter turning, easier front steering, and will help to eliminate any unnecessary drivetrain binding... more
This short shaft kit, or slip yoke eliminator, with the new, heavy duty shaft is engineered to withstand the increased torque (50% increase) generated by extreme reduction of the Tera Low231.
The kit also eliminates the need to lower the transfer case in most cases by increasing the rear driveshaft length by four inches... more
This TeraLOW version of the Low18 gear set
is designed to be used with Saturn (Warn) overdrives, and reduces the
2.43:1 stock low-range ratio to 3.15:1.
This kit ships with only three gears.
The additional gear, part 911098, can
be purchased also manufactured by Advance
Adapters to complete the set.
The TeraFlex 2Low 241-OR for Tj Wrangler Rubicon models will increase your standard low range shift pattern to included a rear 2WD low range option... more
This overhaul kit for Dana 300 Contains all the bearings and seals to completely overhaul the Dana #300 transfer case. Kit includes intermediate shaft, shim set for bearing adjustment and shift fork friction pad set.
This kit replaces the stock output shaft of the Dana 300 transfer case (1981-86) with a heavy-duty output shaft. The new shaft is better suited for high-torque and high-stress situations because it is thicker and stronger... more
Our rear axle bracket kit includes all brackets necessary for a complete TJ rear end. The brackets are precision laser cut from 3/16” steel and accurately formed to ensure proper positioning.
Take your Jeep to the next level with the Jeep parts found on our site. We are a leading Jeep accessories retailer, providing performance Jeep parts to our customers. It's a Jeep thing-and we do understand!We work hard to give you the best information and Jeep parts & accessories to turn your vehicle into a top-notch ride. Whether you are looking for 4wd Jeep suspension parts & accessories or want improved Jeep performance, we have the essential Jeep parts & Jeep accessories you need. Best of all, each one of us is a Jeep enthusiast and if you have questions about any 4wd Jeep parts & Jeep accessories we offer, simply give us a call and we can help!
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech Jeep Parts, we have no affiliation with either. [4]
