Stamped Sheet Metal & Skid Plates Award winning simplicity
This kit was designed with performance in mind...and not just off-road performance. This kit gives you the ability to run larger tires with less lift.
Add the Highline Body Kit to your 97-06 Jeep Wrangler (TJ) and notice dramatically improved ride quality, climbing ability, and traction with absolutely no compromises.
Run bigger rubber with less suspension lift. This ultimate upgrade for all '97-'06 Wranglers makes plenty of clearance for 34" tires with no lift!
Add a 3" lift and run 37" tires! Provides an ultra low center of gravity for greater safety and vehicle stability while creating a unique and balanced look.
Kit comes with 14 gauge factory stamped steel fender assemblies with inner fender wells and battery trays that relocate all under-hood components to their
respective positions without drilling or modifications.
All steel, no flimsy fiberglass. This hood's special design not only allows for mass air circulation,
but sets the vehicle styling apart from the rest. The AEV Heat Reduction Hood also includes three mesh vent areas.
AEV Rear Corner Guards feature thick 1/8" stamped steel construction that's both e-coated and powdercoated with a black textured finish. Hardware included. Made in USA.
AEV Rear Corner Guards feature thick 1/8" stamped steel construction. These new Builders Corners are raw finish, and they also don't have the holes for the tail lights or the license plate bracket. These are for guys that want to cut them themselves to accommodate additional mounting options. Hardware included. Made in USA.
Have you ever damaged your rear driveshaft by bending it on rocks, or worse you broke the CV joint or the flange? Maybe you just donŐt want to put yourself in that position to begin with. The AEV JK Slider is an under-axle skid plate that can make these woes a thing of your past. This JK Dana 44 specific Slider bolts on in minutes and hugs your differential housing so well that it gives up zero ground clearance in addition to protecting that spinning CV joint. Slider is built primarily from 1/4" steel and comes with a black power coat finish with all hardware. Simple hand tools required. Works with all JK Dana 44s rear axles.
Tired of dragging on your "shovel" or being the "anchor" of your group? The stock TJ center skids can be a major hindrance on any trail and
with their weak construction, they bend easily sometimes even interfering with the powertrain or exhaust.
The Tummy Tucker is the unmatched benchmark for strength, ground clearance and smooth contours.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [2]
