Another new addition to the XHD family, the New Stubby Ends from Rugged Ridge feature a tough off road look while providing greater tire clearance for lifted Jeeps. The beefy black powder coated steel ends caps extend out to the edge of the grille to offer protection, but leaves the wheel wells open for maximum travel. Each End attaches to the XHD center section using welded on bolts and nylon locking nuts. All XHD Bumper components feature a limited Three year warranty and offer the ultimate in style and function!
Featured on the Rugged Ridge Modular Winch Mount Bumper, above the WARN 9.5cti is 9500 lbs. of pulling capacity packed into a massive aluminum die-cast body.
Sealed for extreme-duty water-resistance and powered by a new generation Bosch motor and controlled by WARN's first thermometric indicator that gives the operator motor operating temperature information.
Featured on the Rugged Ridge Modular Non-Winch Mount Bumper above, KC's Rally 800 Series lights are the next generation in high performance lighting! They feature rugged, all Stainless Steel 8 inch round housings with sturdy, oversize mounting flanges and virtually unbreakable hard coated Lexan lenses.
Custom designed to protect the steering components on all '07-'13 Jeep Wranglers, this overbuilt skid plate is a must for those off road adventures.
Constructed of durable 1/4" powder coat painted steel with a rust resistant E-Coating, this Skid plate is designed to take whatever the trail throws at you!
Make the most of your rear bumper with our XHD Rear Bumper System.
Features easy installation, amazing looks and two reinforced heavy duty D-Ring attachment points.
Special "inner mounting plate" provides an extremely secure mounting point - strong enough for offroad use!
Special custom design has the center portion curved to fit oversized tire sizes up to 35". Includes a 2" receiver box for use with accessories. Easy bolt-on installation allows for a clean switch from a factory bumper to an offroad bumper. Each RRC rear includes a special UV treated textured plastic filler plate to fill in the gap between the body and the bumper, a Rugged Ridge exclusive.
Keep your rocker panels from being beaten to a pulp on the trail with Rugged Ridge's Side Armor. Built from heavy-duty 2" x 0.120" black texture powdercoated steel tubing, these guards will take the beating that was meant for your body sheetmetal. Simple bolt-on design utilizes existing body mount locations for a secure, rattle free installation.
The black texture finish resists scratches and gives a slip-resistant surface for door entry. Sold as a pair and includes all necessary installation hardware.
These traditional designs incorporate tough non-slip nylon pads making it easier stepping in and out of your vehicle. Custom engineered to fit specific vehicle applications with easy installation. Features fully welded metal end caps that are ground and polished smooth before final finishing.
Key features include mandrel bent 3" diameter x .109" thick seamless tubing. Final finishes include e-coated steel with oven baked powder coatings in textured black or gloss black.
Due to the wide oversized flares and larger tires, an oversized tube step looks better on the 2007+ Wrangler. This 4" oval design provides an enhanced step area to make it easier to get in and out of the vehicle. The straight oval design is similar to the MOPAR® 3" tube step as it begins and ends just inside the fender well. Tough E-coat powder coat finish provides the ultimate in rust protection. Available in textured black and polished stainless-Textured black complements the vehicles fender flares.
Jeep Parts & Jeep Accessories Take your Jeep to the next level with the parts found on our site. We are a leading Jeep accessories retailer, providing performance products for our customers. We work hard to give you the best information to turn your vehicle into a top-notch ride. Whether you are looking for 4wd suspension parts & accessories or want improved Jeep performance, we have the parts & Jeep accessories you need.
The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.
*Jeep, Wrangler, Rubicon, Renegade, CJ, Quadra-Trac and the Jeep Grille Design are registered trademarks of Chrysler LLC. Quadratec, Inc, has no affiliation with Chrysler LLC. Throughout this website and catalog the terms Jeep, Wrangler, MOPAR®, & Rubicon are used for identification purposes only. Geo is a registered trademark and Tracker is a registered trademark of the General Motors Company. Sidekick and Samurai are trademarks of Suzuki Motor Corporation. Amigo is a product of Isuzu Motors Limited. Chevrolet, the Chevrolet Emblem, S Series, GMC, GMC Truck, Chevy, Vortec and Sonoma are registered trademarks of the General Motors Company. Expedition, F-Series, F-150, F-250, F-350, Super Duty and Flare Side are registered trademarks of the Ford Motor Company. All other marks, names, and logos mentioned on this web site are the property of their respective owners.
Throughout this web site all the preceding marks & logos are used for identification purposes only. Quadratec has no affiliation with the Chrysler LLC, MOPAR®, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited. It is not implied that any part listed is a product of, or approved by Chrysler LLC, General Motors Company, Ford Motor Company, Suzuki Motor Corporation or Isuzu Motors Limited.
Quadratec, Inc. is sometimes mis-searched as Quadartec and Quadratech, we have no affiliation with either. [1]
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
Choose Bumper Style
Do you want caps?
Additional Options
